SW03A47FF3

Milligard^® 0.2 µm nominal, OptiScale^® Capsule

OptiScale^® 47, filtration area 17.7 cm², pore size 0.2 μm

• Sinonimo/i: Optiscale Capsule Filter Milligard 0.2 μm 3/4 in. TC/TC
• Codice UNSPSC: 23151806
• eCl@ss: 32031690

Proprietà

• Materiali: PVDF vent cap; fluoroelastomer FKM seal; mixed cellulose esters (MCE) ; polycarbonate ; polypropylene support
• Livello qualitativo: 400
• Conformità normativa: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• Sterilità: non-sterile
• Compatibilità con la sterilizzazione: autoclavable compatible
• Nome Commerciale: OptiScale^® 47
• Caratteristiche: hydrophilic
• Produttore/marchio commerciale: OptiScale^®
• Parametri: 25 °C max. inlet temp.; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 80 psig max. inlet pressure
• tecniche: prefiltration: suitable
• Diametro: 6.9 cm (2.7 in.)
• Superficie filtrante: 17.7 cm²
• Diam. connessione ingresso: 3/4 in.
• Diam. connessione uscita: 3/4 in.
• Impurezze: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• Matrice: Milligard^®
• Dimensione pori: 0.2 μm nominal pore size; 0.2 μm pore size
• Raccordi: inlet sanitary flange; outlet sanitary flange; (19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)

Descrizione

Descrizione generale

Device Configuration: Capsule

Caratteristiche e vantaggi

Format: Single Layer

Altre note

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Nota sulla preparazione

Sterilization Method
3 autoclave cycles of 60 min @ 121 °C; not in-line steam sterilizable

Risultati analitici

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Note legali

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Informazioni sulla sicurezza

• Codice della classe di stoccaggio: 4.1B - Flammable solid hazardous materials
• Classe di pericolosità dell'acqua (WGK): WGK 2