Passa al contenuto
Merck
Tutte le immagini(3)

Documenti fondamentali

Z231215

Sigma-Aldrich

Aldrich® modified sublimation apparatus

capacity, ≤ 20 g starting material

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali

Scegli un formato

1 EA
CHF 728.00

CHF 728.00

Check Cart for Availability
Tutte le immagini(3)

Scegli un formato

Cambia visualizzazione
1 EA
CHF 728.00

About This Item

Codice UNSPSC:
41121800
NACRES:
NB.43

CHF 728.00

Check Cart for Availability

Caratteristiche

capacity≤ 20 g starting material

D.E. serbatoio

48 mm

Categorie correlate

Descrizione generale

Unique sample collection chamber simplifies the separation and removal of pure materials. An internal baffle with 20mm diameter opening prevents pure material on the cold finger from contacting impure material at the bottom of the tube. Removable vacuum inlet with stopcock improves handling during sample removal and reduces breakage of glassware.

Note legali

Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

Solo come componenti del kit

N° Catalogo
Descrizione
  • Aldrich® modified sublimation head, for Z231215, w/o vacuum inlet
  • Aldrich® modified sublimation reservoir, for Z231215

I componenti del kit sono disponibili anche separatamente

N° Catalogo
Descrizione
SDS
  • Z549479Stopcock Adapter, straight glass stopcock, joint: ST/NS 14/20SDS

Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documenti section.

Se ti serve aiuto, non esitare a contattarci Servizio Clienti

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

Questions

1–2 of 2 Questions  

  1. What is the Department of Transportation shipping information for this product?

    1 answer

    1. Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.

      Helpful?

  2. Are the hose barbs for Product Z231215 the same as those on Product Z221171? And what is the approximate outside diameter? And what type of tubing should I use?

    1 answer

    1. All three dimensions (as shown by the red arrows in the image below) are the same:The hose barbs for Product Z231215 are the same as those on the Z221171 (approximately 5/16 inch outside diameter).Heavy-walled tubing with an inside diameter of 1/4 in (approx. 6 mm) would work fine. The outside diameter of the hose barb is around 5/16 in (8 mm). You want the tubing to stretch a little bit so that you get a tight seal.

      Helpful?

Reviews

No rating value

Active Filters

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.