![2-[3-(2H-Benzotriazol-2-yl)-4-hydroxyphenyl]ethyl methacrylate 99%](/deepweb/assets/sigmaaldrich/product/structures/208/967/cf29567e-c125-41dc-b80a-66889fa1a679/640/cf29567e-c125-41dc-b80a-66889fa1a679.png)
For a larger printer, an ester solvent, such as Carbitol Acetate, is recommended. This is primarily due to the compatibility with most industrial print-heads. However, this assumes that the ink has not be cured. If the ink is cured, ultrasonic cleaning and back flushing may remove the cured ink. Any light source is to be avoided at all times to prevent curing of the ink in and around the print-head.
901974
SunTronic® UV curing jettable insulator for low-K dielectric applications
Sinonimo/i:
Inkjet UV insulator, SunTronic® U6415 JET9525 clear dielectric, UV curing insulator coating, dielectric ink
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Scegli un formato
Cambia visualizzazione
250 ML
CHF 220.00
About This Item
Codice UNSPSC:
12352103
NACRES:
NA.23
Prodotti consigliati
Descrizione
Cure dose required (un-doped mercury): 100-300 mJ/cm2
Jetting temperature: 50°C
Stato
liquid
Caratteristiche più verdi
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.
sustainability
Greener Alternative Product
Tensione superficiale
32-37 mN/m
Viscosità
11-13 cP (at jetting temperature)
Categoria alternativa più verde
Temperatura di conservazione
2-8°C
Categorie correlate
Descrizione generale
SunTronic jettable insulator is a UV-curing, inkjet printable insulator coating,suitable for low-K dielectric applications, printed electronics and related applications.
The insulator can be jetted through various piezo DOD inkjet printheads, although full printhead compatibility will need to be verified in each case. The product can be cured using an un-doped medium pressure mercury source. If over printing the dielectric with a SunTronic jettable silver ink then a cure dose of 300 mJ/cm2 is recommended.
The insulator can be jetted through various piezo DOD inkjet printheads, although full printhead compatibility will need to be verified in each case. The product can be cured using an un-doped medium pressure mercury source. If over printing the dielectric with a SunTronic jettable silver ink then a cure dose of 300 mJ/cm2 is recommended.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Click here for more information.
Note legali
SunTronic is a registered trademark of Sun Chemical, Inc.
Avvertenze
Danger
Indicazioni di pericolo
Consigli di prudenza
Classi di pericolo
Aquatic Chronic 2 - Eye Irrit. 2 - Repr. 2 - Skin Irrit. 2 - Skin Sens. 1 - STOT RE 1 - STOT SE 3
Organi bersaglio
Liver,Upper respiratory tract, Respiratory system
Codice della classe di stoccaggio
6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
Classe di pericolosità dell'acqua (WGK)
WGK 2
Punto d’infiammabilità (°F)
204.8 °F
Punto d’infiammabilità (°C)
96 °C
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Articoli
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
-
What chemicals (besides acetone, isopropyl) are necessary for cleaning this ink from the nozzles and pipes of the inkjet system?
1 answer-
Helpful?
-
Active Filters
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.
