When using polycarbonate bottles, it is recommended to autoclave and/or use radiation for sterilization. Before autoclaving, it is important to thoroughly rinse the products to avoid crazing and spotting caused by detergent residues. The autoclaving cycles should be limited to 20 minutes at 121°C, as repeated autoclaving can lead to a loss of mechanical strength, affecting its performance under high-stress applications such as centrifugation. It is not advisable to expose these vessels to high stresses such as vacuum application or centrifugation. Dishwashers can be used with all resins, except for LLDPE, acrylic, and PS, due to temperature limitations. The maximum recommended use temperature for polycarbonate is 115°C - 138°C. Repeated washing of polycarbonate vessels in the dishwasher can weaken the strength of the bottles. Detailed information and recommendations on autoclaving and a table of resin properties with recommended sterilization methods can be found in our Nalgene technical guide, specifically on page 16 and 19.
TMO383423-42
Nalgene® Certified Clean Biotainer(TM) Carboys
polycarbonate, volume 20 L, case of 3 ea
Synonyme(s) :
biotainer carboy, certified nalgene carboy, sterile carboy
Sélectionner une taille de conditionnement
820.00 CHF
Sélectionner une taille de conditionnement
About This Item
820.00 CHF
Produits recommandés
Matériaux
polycarbonate
Conditionnement
case of 3 ea
Fabricant/nom de marque
Nalgene 383423-42
Volume
20 L
20000 mL
Vous recherchez des produits similaires ? Visite Guide de comparaison des produits
Description générale
Caractéristiques et avantages
- Provided sterile and ready-to-use; including certified clean products, which meet USP<788> standards and endotoxins below 0.5 EU/mL
- Certified clean products include triple layer packaging, with two heat-sealed layers to facilitate ease of entry into cleanrooms
- Sterility Assurance Level of 10-6 inside the bottle/closure
- Robust, PC can be used from -100°C to 100°C, allowing for both heated mixing and frozen storage or shipment. Must be tested in actual use conditions as results may vary depending upon application.
- Inspection procedures throughout manufacturing include leak testing, dimensional testing, visual inspection for particulates and release testing to ensure the product meets all specifications.
- All container/closure systems are certified leakproof** to protect valuable contents
Informations légales
Faites votre choix parmi les versions les plus récentes :
Certificats d'analyse (COA)
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documents section.
Si vous avez besoin d'assistance, veuillez contacter Service Clients
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
-
Can you provide information on the sterilization method for product TMO383423-42?
1 answer-
Helpful?
-
Active Filters
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique
