Produktnummer
Marke
Produktbeschreibung
Sigma-Aldrich
Antimon, powder, -100 mesh, 99.5% trace metals basis
Sigma-Aldrich
Antimon, beads, ≤5 mm, low oxide, 99.999% trace metals basis
Antimon, rod, 6mm, diameter 6mm, 99.999%
Antimon, rod, 15mm, diameter 2.0mm, 99.99%
Antimon, rod, 20mm, diameter 4.7mm, 99.999%
Antimon, rod, 25mm, diameter 2.0mm, 99.99%
Antimon, rod, 50mm, diameter 2.0mm, 99.99%
Antimon, rod, 50mm, diameter 4.7mm, 99.999%
Antimon, foil, not light tested, 50x50mm, thickness 0.05mm, permanent polyester support, 95+%
Antimon, foil, not light tested, 25x25mm, thickness 0.002mm, permanent polyester support, 95+%
Antimon, foil, light tested, 25x25mm, thickness 0.05mm, permanent polyester support, 95+%
Antimon, foil, not light tested, 50x50mm, thickness 0.002mm, permanent polyester support, 95+%
Antimon, foil, not light tested, 50x50mm, thickness 0.005mm, permanent polyester support, 95+%
Antimon, foil, not light tested, 50x50mm, thickness 0.015mm, permanent polyester support, 95+%
Antimon, foil, not light tested, 25x25mm, thickness 0.01mm, permanent polyester support, 95+%
Antimon, foil, not light tested, 100x100mm, thickness 0.025mm, permanent polyester support, 95+%
Antimon, foil, not light tested, 25x25mm, thickness 0.005mm, permanent polyester support, 95+%
Antimon, foil, not light tested, 25x25mm, thickness 0.015mm, permanent polyester support, 95+%
Antimon, microfoil, 50x50mm, thinness 0.5μm, specific density 334.5μg/cm2, 6 micron aluminum permanent support, 95+%
Antimon, foil, not light tested, 25x25mm, thickness 0.025mm, permanent polyester support, 95+%
Antimon, microfoil, 25x25mm, thinness 0.5μm, specific density 334.5μg/cm2, 6 micron aluminum permanent support, 95+%
Antimon, foil, not light tested, 50x50mm, thickness 0.01mm, permanent polyester support, 95+%
Antimon, foil, light tested, 50x50mm, thickness 0.05mm, permanent polyester support, 95+%
Antimon, foil, not light tested, 100x100mm, thickness 0.01mm, permanent polyester support, 95+%
Antimon, foil, not light tested, 50x50mm, thickness 0.025mm, permanent polyester support, 95+%
Antimon, foil, 50x50mm, thickness 2mm, hot-pressed
Antimon, foil, not light tested, 100x100mm, thickness 0.05mm, permanent polyester support, 95+%
Antimon, foil, not light tested, 100x100mm, thickness 0.015mm, permanent polyester support, 95+%