Direkt zum Inhalt
Merck
  • Evaluation of antimicrobial activity of silver nanoparticles for carboxymethylcellulose film applications in food packaging.

Evaluation of antimicrobial activity of silver nanoparticles for carboxymethylcellulose film applications in food packaging.

Journal of nanoscience and nanotechnology (2014-04-25)
Maria C Siqueira, Gustavo F Coelho, Márcia R de Moura, Joana D Bresolin, Silviane Z Hubinger, José M Marconcini, Luiz H C Mattoso
ZUSAMMENFASSUNG

In this study, silver nanoparticles were prepared and incorporated into carboxymethylcellulose films to evaluate the antimicrobial activity for food packaging applications. The techniques carried out for material characterization were: infrared spectroscopy and thermal analysis for the silver nanoparticles and films, as well as particle size distribution for the nanoparticles and water vapor permeability for the films. The antimicrobial activity of silver nanoparticles prepared by casting method was investigated. The minimum inhibitory concentration (MIC) value of the silver nanoparticles to test Gram-positive (Enterococcus faecalis) and Gram-negative (Escherichia coli) microorganisms was carried out by the serial dilution technique, tested in triplicate to confirm the concentration used. The results were developed using the Mcfarland scale which indicates that the presence or absence of turbidity tube demonstrates the inhibition of bacteria in relation to the substance inoculated. It was found that the silver nanoparticles inhibited the growth of the tested microorganisms. The carboxymethylcellulose film embedded with silver nanoparticles showed the best antimicrobial effect against Gram-positive (E. faecalis) and Gram-negative (E. coli) bacteria (0.1 microg cm(-3)).

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Carboxymethylcellulose Natriumsalz, low viscosity
Sigma-Aldrich
Natriumcarboxymethylcellulose Natriumsalz, viscosity 50-200 cP , c=4% H2O at 25­°C
Sigma-Aldrich
Carboxymethylcellulose Natriumsalz, Medium viscosity
Sigma-Aldrich
Silber, conductive paste
Sigma-Aldrich
Natriumcarboxymethylcellulose Natriumsalz, average Mw ~700,000
Sigma-Aldrich
Carboxymethylcellulose Natriumsalz, High viscosity
Sigma-Aldrich
Natriumcarboxymethylcellulose Natriumsalz, average Mw ~250,000, degree of substitution 0.9
Sigma-Aldrich
Natriumcarboxymethylcellulose Natriumsalz, average Mw ~250,000, degree of substitution 0.7
Sigma-Aldrich
Natriumcarboxymethylcellulose Natriumsalz, average Mw ~250,000, degree of substitution 1.2
Sigma-Aldrich
Carboxymethylcellulose Natriumsalz, medium viscosity
Sigma-Aldrich
Silber-Nanodrähte, diam. × L 200  nm × 10 μm, 0.5% (isopropyl alcohol suspension)
Sigma-Aldrich
Carboxymethylcellulose Natriumsalz, ultra high viscosity, highly purified
Sigma-Aldrich
Carboxymethylcellulose Natriumsalz, meets USP testing specifications, Medium viscosity
Sigma-Aldrich
Silber, colloidal, 65-75% Ag basis
Sigma-Aldrich
Silber, foil, thickness 1.0 mm, 99.99% trace metals basis
Silber, foil, 150x150mm, thickness 0.25mm, as rolled, 99.95+%
Silber, foil, 100x100mm, thickness 0.125mm, as rolled, 99.95+%
Silber, insulated wire, 10m, conductor diameter 0.25mm, insulation thickness 0.023mm, polyester insulation, 99.99%
Silber, foil, 150x150mm, thickness 0.5mm, as rolled, 99.99+%
Silber, rod, 100mm, diameter 3.0mm, as drawn, 99.997%
Silber, wire reel, 10m, diameter 1.0mm, annealed, 99.99%
Silber, wire reel, 10m, diameter 0.8mm, as drawn, 99.99%
Silber, wire reel, 1m, diameter 0.25mm, as drawn, 99.997%
Silber, foil, 25x25mm, thickness 0.5mm, as rolled, 99.99+%
Silber, foil, 100x100mm, thickness 0.5mm, as rolled, 99.99+%
Silber, rod, 500mm, diameter 3.5mm, as drawn, 99.95+%
Silber, wire reel, 5m, diameter 0.25mm, annealed, 99.99%
Silber, wire reel, 5m, diameter 0.8mm, as drawn, 99.99%
Silber, foil, 50x50mm, thickness 0.125mm, as rolled, 99.99+%
Silber, wire reel, 5m, diameter 0.25mm, as drawn, 99.997%