Accéder au contenu
MilliporeSigma
  • Strontium exerts dual effects on calcium phosphate cement: Accelerating the degradation and enhancing the osteoconductivity both in vitro and in vivo.

Strontium exerts dual effects on calcium phosphate cement: Accelerating the degradation and enhancing the osteoconductivity both in vitro and in vivo.

Journal of biomedical materials research. Part A (2014-08-05)
Guan-Ming Kuang, W P Yau, Jun Wu, Kelvin W K Yeung, Haobo Pan, W M Lam, W W Lu, K Y Chiu
RÉSUMÉ

Calcium phosphate cements (CPCs) have long been used as osteoconductive bone substitutes in the treatment of bone defects. However, the degradation rate of CPC is typically too slow to match the new bone growth rate. It is known that strontium increases the solubility of hydroxyapatite as well as exerts both anabolic and anticatabolic effects on bone. Therefore, we hypothesized that the incorporation of strontium would accelerate the degradation rate and enhance the osteoconductivity of CPC. In this study, Three groups, CPC (0% Sr-CPC), 5% Sr-CPC, and 10% Sr-CPC, were prepared, with the total molar ratio for Sr/(Sr+Ca) in the cement powder phase being 0, 5, and 10%, respectively. In the immersion test, less residual weight was observed in both 5% Sr-CPC and 10% Sr-CPC groups than CPC group. In addition, a higher osteoblastic cell proliferation rate and alkaline phosphatase activity were obtained in the strontium groups. In a rat femur bone defect model comparing CPC with 10% Sr-CPC, at 2 weeks postoperation, early endochondral ossification was found in the 10% Sr-CPC group, whereas only fibrous tissue was observed in control group; at 4-16 weeks postoperation, progressive osteoconduction toward the cement was observed in both groups. At 32 weeks, a higher peri-cement bone area and reduced cement area were noted in the 10% Sr-CPC group. In conclusion, in the 10% Sr-CPC group, strontium exerts dual effects on CPC: accelerating degradation rate and enhancing osteoconductivity, as shown here both in vitro and in vivo.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Acide citrique, meets analytical specification of Ph. Eur., BP, USP, E330, anhydrous, 99.5-100.5% (based on anhydrous substance)
Sigma-Aldrich
Acide citrique, ≥99.5%, FCC, FG
Sigma-Aldrich
Acide citrique, anhydrous, suitable for cell culture, suitable for plant cell culture
USP
Acide citrique, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Nitrogen, ≥99.998%
Sigma-Aldrich
Acide citrique, BioUltra, anhydrous, ≥99.5% (T)
Sigma-Aldrich
Acide citrique, ACS reagent, ≥99.5%
Sigma-Aldrich
Acide citrique, 99%
Sigma-Aldrich
2-Hydroxybutyric acid sodium salt, 97%
Supelco
Acide citrique, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Edelfosine, ≥95% (HPLC)
Sigma-Aldrich
Acide citrique, anhydrous, free-flowing, Redi-Dri, ACS reagent, ≥99.5%
Supelco
Acide citrique, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Acide citrique, anhydrous, European Pharmacopoeia (EP) Reference Standard