Unfortunately, there is no information on the curing process for this product 791903 when used on paper. Conductive Silver Printing Ink is ideal for use in plastic/printed electronics and can be used with conventional screen print technology and can be cured at 150-180 °C.
791903
Conductive silver printing ink, resistivity 30 - 35 μΩ-cm
Synonyme(s) :
Dyesol® DYAG350 conductive silver ink, Screen printable silver paste
Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
About This Item
Code UNSPSC :
12352103
Nomenclature NACRES :
NA.23
Produits recommandés
Description
volume resistivity 30 - 35 μΩ-cm at a 180°C cure temperature
Forme
paste (white)
Composition
Solids content, 65-75%
Viscosité
6000-9000 mPa.s (at shear rate of 10 sec-1 at 25°C)
Description générale
Conductive silver printing ink, resistivity 30-35 μΩ-cm, is a combination of polymer coated silver particles and silver-based compounds in an organic medium. It is a low cost conductive ink that can be printed on a variety of substrates like polyester, glass, and indium tin oxide (ITO) which can be cured at 150-180 °C.[1][2]
Application
Conductive silver inks can be coated in between reduced graphene oxide (rGO) and copper surfaces to stabilize the charge carrying medium which can be used in the fabrication of a thermistor.[3] Laser induced forward transfer (LIFT) may use conductive silver printing inks to print indium tin oxide nanoparticles based thin films for solar cells and organic light emitting diodes (OLEDS) based applications.[4]
This Conductive Silver ink is an economical grade of specially formulated, screen-printable, conductive silver ink which provides good conductivity at low cure temperatures. This conductive silver ink provides low resistance of printed conducting tracks.
This Conductive Silver Printing Ink is comprised of a mixture of pure silver particles and organometallic silver compound in an organic medium. When printed on polyester (PET or PEN) films and then cured at 150 - 180°C, the particles consolidate to form a chemically-welded, continuous silver track to yield low bulk resistivity.
This Conductive Silver Printing Ink is comprised of a mixture of pure silver particles and organometallic silver compound in an organic medium. When printed on polyester (PET or PEN) films and then cured at 150 - 180°C, the particles consolidate to form a chemically-welded, continuous silver track to yield low bulk resistivity.
Informations légales
Dyesol is a registered trademark of Greatcell Solar
Mention d'avertissement
Warning
Mentions de danger
Conseils de prudence
Classification des risques
Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2 - Skin Irrit. 2
Code de la classe de stockage
10 - Combustible liquids
Classe de danger pour l'eau (WGK)
WGK 3
Point d'éclair (°F)
174.2 °F
Point d'éclair (°C)
79 °C
Faites votre choix parmi les versions les plus récentes :
Certificats d'analyse (COA)
Lot/Batch Number
Vous ne trouvez pas la bonne version ?
Si vous avez besoin d'une version particulière, vous pouvez rechercher un certificat spécifique par le numéro de lot.
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Les clients ont également consulté
Metal-based inkjet inks for printed electronics.
Kamyshny A, et al.
Open Applied Physics Journal, 4(1), 4153-4158 (2011)
Direct ink-jet printing and low temperature conversion of conductive silver patterns.
Smith PJ, et al.
J. Mater. Sci., 41(13), 4153-4158 (2006)
Design guidelines of laser reduced graphene oxide conformal thermistor for IoT applications.
Romero FJ, et al.
Sensors and actuators A, Physical, 274(1), 148-154 (2018)
Conductive silver ink printing through the laser-induced forward transfer technique.
Florian C, et al.
Applied Surface Science, 336(1), 304-308 (2015)
Articles
The ability to pattern conductive electrodes is technologically relevant for several applications, including photovolatics, displays, sensors, and biomedical devices.
Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.
Dye-sensitized solar cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs.
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
-
silver ink printed paper can use in oven?
1 answer-
Helpful?
-
Active Filters
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique
