Accéder au contenu
MilliporeSigma
Toutes les photos(2)

Documents

719811

Sigma-Aldrich

Carbon nanofibers

greener alternative

pyrolitically stripped, platelets(conical), >98% carbon basis, D × L 100 nm × 20-200 μm

Synonyme(s) :

PR-25-XT-PS, Conical carbon nanofibers

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme


About This Item

Formule empirique (notation de Hill):
C
Poids moléculaire :
12.01
Numéro MDL:
Code UNSPSC :
12352103
ID de substance PubChem :
Nomenclature NACRES :
NA.23

Source biologique

platelets (conical)

Pureté

>98% carbon basis

Forme

powder

Caractéristiques du produit alternatif plus écologique

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

P × L

100 nm × 20-200 μm

Superficie

54 m2/g

Impuretés

<14,000 ppm Iron content

Diamètre moyen

130 nm

Dimension de pores

0.12 cm3/g average pore volume
89.3 Å average pore diameter

Pf

3652-3697 °C

Densité

1.9 g/mL at 25 °C

Masse volumique apparente

0.5‑3.5 lb/cu.ft

Autre catégorie plus écologique

InChI

1S/C

Clé InChI

OKTJSMMVPCPJKN-UHFFFAOYSA-N

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Description générale

Vapor grown carbon nanofibers (VGCF) can impart dissipative properties and enhance mechanical properties to polymer, ceramic and metal matrices. Tailor made surface functionalization of carbon nanofibers is possible owing to its unique surface state.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Carbon nanofibers are ideal materials due to its impressive material properties such as mechanical strength, thermal and electrical conductivity. Click here for more information.

Application

Adsorption of monoclonal CD3 antibodies on the modified surfaces of pyrolytically stripped carbon nanofibers were studied.

Notes préparatoires

Produced by Floating Catalyst Vapor-Grown Method

Informations légales

Product of Pyrograf® Products Inc.
Pyrograf is a registered trademark of Applied Sciences, Inc.

Pictogrammes

Exclamation mark

Mention d'avertissement

Warning

Mentions de danger

Classification des risques

Eye Irrit. 2 - STOT SE 3

Organes cibles

Respiratory system

Code de la classe de stockage

11 - Combustible Solids

Classe de danger pour l'eau (WGK)

WGK 3

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable


Certificats d'analyse (COA)

Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Les clients ont également consulté

Effect of carbon nanofibre structure on the binding of antibodies
Naguib NN, et al.
Nanotechnology, 16(4) (2005)
Antoine P Pagé et al.
PloS one, 10(7), e0132062-e0132062 (2015-07-15)
The objectives of this study were to uncover Salix purpurea-microbe xenobiotic degradation systems that could be harnessed in rhizoremediation, and to identify microorganisms that are likely involved in these partnerships. To do so, we tested S. purpurea's ability to stimulate
Svenja T Lohner et al.
The ISME journal, 8(8), 1673-1681 (2014-05-23)
Direct, shuttle-free uptake of extracellular, cathode-derived electrons has been postulated as a novel mechanism of electron metabolism in some prokaryotes that may also be involved in syntrophic electron transport between two microorganisms. Experimental proof for direct uptake of cathodic electrons
Tegan N Lavoie et al.
Environmental science & technology, 49(13), 7904-7913 (2015-07-08)
We report measurements of methane (CH4) emission rates observed at eight different high-emitting point sources in the Barnett Shale, Texas, using aircraft-based methods performed as part of the Barnett Coordinated Campaign. We quantified CH4 emission rates from four gas processing
Lauren K Woolley et al.
Vaccine, 32(34), 4333-4341 (2014-06-17)
Pig responses to recombinant subunit vaccines containing fragments of eight multifunctional adhesins of the Mycoplasma hyopneumoniae (Mhp) P97/P102 paralog family formulated with Alhydrogel(®) or Montanide™ Gel01 were compared with a commercial bacterin following experimental challenge. Pigs, vaccinated intramuscularly at 9

Articles

Pyrograf®-III vapor-grown carbon nanofibers are within the class of materials termed multi-walled carbon nanotubes (MWCNTs), and are produced by the floating catalyst method.

Composite materials with micron scale reinforcements offer tailored properties for various applications.

3D printing is a type of additive manufacturing that can be used to rapidly fabricate components with highly customizable geometries.

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique