CVGB02TP

Cartouche Durapore^® hydrophobe, 0,22 µm

pore size 0.22 μm, cartridge nominal length 20 in. (50 cm), Code 0 (2-222; O-rings)

• Synonyme(s) : Durapore Cartridge Filter 20 in. 0.22 µm hydrophobic Code 0
• Code UNSPSC : 23151806
• eCl@ss : 27293007

Propriétés

• Matériaux: PVDF ; polypropylene ; polypropylene support; silicone seal
• Niveau de qualité: 400
• Stérilité: non-sterile
• Mode de stérilisation compatible: steam-in-place compatible
• Gamme de produits: Durapore^®
• Caractéristiques: hydrophobic
• Fabricant/nom de marque: Durapore^®
• Paramètres: ≤20 mL/min nitrogen diffusion at 1.7 bar (25 psig) and 23 °C (with water); 0.35 bar max. differential pressure (5 psid) at 135 °C (Forward); 0.35 bar max. inlet pressure (5 psi) at 135 °C (Forward); 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward); 1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward); 3.5 bar max. differential pressure (50 psid) at 25 °C (Reverse); 3.5 bar max. inlet pressure (50 psi) at 25 °C (Reverse); 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward); 5.5 bar max. inlet pressure (80 psi) at 25 °C (Forward)
• Technique(s): sterile filtration: suitable
• Longueur: 20 in.
• Largeur: 2.7 in.
• Longueur nominale des cartouches: 20 in. (50 cm)
• Diamètre: 6.9 cm (2.7 in.)
• Surface de filtration: 1.38 m²
• Impuretés: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• Extractibles par gravimétrie: ≤40 mg/cartridge
• Matrice: Durapore^®
• Dimension de pores: 0.22 μm pore size
• Point de bulle: ≥1240 mbar (18 psig), nitrogen with 60/40% IPA/water at 23 °C
• Code de la cartouche: Code 0 (2-222; O-rings)

Description

Description générale

Device Configuration: Cartridge

Conditionnement

Double Easy-Open bag

Autres remarques

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore^® Membrane user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Notes préparatoires

Sterilization Method
30 SIP cycles of 30 min @ 126 °C; 30 autoclave cycles of 60 min @ 126 °C

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Remarque sur l'analyse

Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM^® F838 methodology.

Gravimetric Extractables: after 24 hours in a 70/30% IPA/water mixture at controlled room temperature

Informations légales

ASTM is a registered trademark of American Society for Testing and Materials

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany