SVSXA47FF3

Multimedia Durapore^® 1.2/0.2/0.22 µm, OptiScale^® Capsule

OptiScale^® 47, filter filtration area 17.7 cm²

• Synonym(e): Multimedia Durapore^® 1.2/0.2/0.22 µm, OptiScale^® Capsule
• UNSPSC Code: 23151806

Eigenschaften

• Produktname: OptiScale^® 47 Capsule Media: Milligard^® 1.2 / 0.2 / 0.22 µm Nominal, Max Pressure: 80 psi @ 25 °C
• Quality Segment: 400
• material: PVDF vent cap, fluoroelastomer FKM seal, mixed cellulose esters (MCE) prefilter, polycarbonate device, polypropylene support
• reg. compliance: meets FDA 21 CFR 177-182 (all component materials)
• sterility: non-sterile
• sterilization compatibility: autoclavable compatible
• product line: OptiScale^® 47
• feature: hydrophilic, with prefilter
• manufacturer/tradename: OptiScale^®
• parameter: 25 °C max. inlet pressure, 3.5 bar max. differential pressure (50 psid) at 25 °C, 3.5 bar max. inlet pressure (50 psi) at 25 °C, 80 psig max. inlet pressure
• technique(s): sterile filtration: suitable
• filter diam.: 2.7 in. (6.9 cm)
• filter filtration area: 17.7 cm²
• impurities: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• matrix: Multimedia Durapore^®
• pore size: 1.2/0.2/0.22 μm pore size
• bubble point: ≥3450 mbar (50 psig), air with water
• fitting: (19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)

Beschreibung

General description

Cartridge Type: Liquid

Device Configuration: Capsule

Preparation Note

Sterilization Method: 3 autoclave cycles of 60 min at 123 °C

Analysis Note

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥ 100 mL

Other Notes

Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany