Wichtige Dokumente

Gesamtdokumentation anzeigen

Fortfahren mit

KR05A10FF1

Opticap^® XL10 Polygard^® CR

Name: Opticap<SUP>&#174;</SUP> XL10 Polygard<SUP>&#174;</SUP> CR
Brand: MM

inlet connection diam. 3/4 in., pore size 5.0 μm, cartridge nominal length 10 in. (25 cm)

Synonym(e):

Opticap XL10 Polygard CR 5.0 μm 3/4 in. TC/TC, Opticap^® XL10 Polygard^® CR

Anmelden zur Ansicht der Organisations- und Vertragspreise.

Größe auswählen

Ansicht ändern

Größe/SKU	Verfügbarkeit	Preis

Über diesen Artikel

UNSPSC Code:

23151806

Preise und Verfügbarkeit sind derzeit nicht verfügbar.

Technischer Dienst

Benötigen Sie Hilfe? Unser Team von erfahrenen Wissenschaftlern ist für Sie da.

Unterstützung erhalten

Eigenschaften

Produktname

Opticap^® XL10 Polygard^® CR, Chemistry: Polypropylene (PP)Inlet: 3/4 in. Sanitary FlangeOutlet: 3/4 in. Sanitary FlangeMax Operating Pressure: 80 psi @ 25 °C

Quality Segment

400

material

polypropylene , polypropylene housing, polypropylene support, polypropylene vent cap, silicone seal

reg. compliance

meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)

manufacturer/tradename

Opticap^®

parameter

1.0 bar max. inlet pressure (15 psi) at 80 °C, 2.75 bar max. inlet pressure (40 psi) at 60 °C, 25 °C max. inlet temp., 4.8 bar max. differential pressure (70 psid) at 20 °C, 5.5 bar max. inlet pressure (80 psi) at 25 °C, 80 psig max. inlet pressure

L

33.5 cm (13.2 in.)

cartridge nominal length

10 in. (25 cm)

diam.

10.7 cm (4.2 in.)

inlet connection diam.

3/4 in.

inlet to outlet W

33.5 cm (13.2 in.)

outlet connection diam.

3/4 in.

impurities

≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction), <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

gravimetric extractables

≤55 mg/capsule

matrix

Polygard^®-CR

pore size

5.0 μm nominal pore size, 5.0 μm pore size

input

sample type liquid

fitting

inlet sanitary flange, 19 mm (3/4 in.) inlet/outlet sanitary flange, outlet sanitary flange

Beschreibung

General description

Polygard^® CR products are nominally rated filters designed for particle removal applications in liquids and gases. The graded-density depth structure of Polygard^® CR filter media provides maximum filtration capacity, and the all-polypropylene construction offers low extractables levels and broad chemical compatibility.

The KR05A10FF1 Opticap^® XL10Polygard^® CR features a pore size of 5.0 μm. This single layer capsule filter has a sanitary flange inlet/outlet connection measuring 3/4 in. in diameter.

Opticap XL capsule filters eliminate the time and expense associated with assembling, cleaning, and validating stainless steel housings. The capsule patented design allows unparalleled thermal and hydraulic stress resistance, resulting in reliability, high confidence in the sterility process and improved cleanliness. The unique capsule design with Polygard^® CR media minimizes hold-up volume and reduces production losses.

Features and Benefits

Format: Single Layer

Packaging

Leicht zu öffnender Doppelbeutel

Preparation Note

Sterilization Method
3 Autoklavenzyklen von 30 min bei 126 °C; nicht inline dampfsterilisierbar

Analysis Note

Erfüllt die Anforderungen des USP-Tests auf oxidierbare Substanzen nach Durchspülen mit ≥5 l Wasser

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Other Notes

Diese Produkte werden in einem Werk hergestellt, das den GMP-Richtlinien der FDA entspricht.

Legal Information

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

Disclaimer

EMD Millipore Corporation bestätigt, dass dieses Produkt der europäischen Druckgeräterichtlinie 97/23/EG vom 29. Mai 1997 entspricht. Dieses Produkt wurde unter Artikel 3 § 3 der Druckgeräterichtlinie klassifiziert. Das Produkt wurde in Übereinstimmung mit anerkannten technischen Methoden entwickelt und hergestellt, um einen sicheren Betrieb zu gewährleisten. In Konformität mit Artikel 3 § 3 dieser Druckgeräterichtlinie besitzt dieses Produkt kein CE-Zeichen.

Ähnliche Artikel vergleichen

Vollständigen Vergleich anzeigen

Unterschiede anzeigen

1 of 1

Dieser Artikel	KR05A10TT1	KR99A10FF1	KRK3A10FF1
Millipore KR05A10FF1 Opticap^® XL10 Polygard^® CR	Millipore KR05A10TT1 Opticap^® XL10 Polygard^® CR	Millipore KR99A10FF1 Opticap^® XL10 Polygard^® CR	Millipore KRK3A10FF1 Opticap^® XL10 Polygard^® CR
description Chemistry: Polypropylene (PP)Inlet: 3/4 in. Sanitary FlangeOutlet: 3/4 in. Sanitary FlangeMax Operating Pressure: 80 psi @ 25 °C	description Chemistry: Polypropylene (PP)Inlet: 1-1/2 in. Sanitary FlangeOutlet: 1-1/2 in. Sanitary FlangeMax Operating Pressure: 80 psi @ 25 °C	description Chemistry: Polypropylene (PP)Inlet: 3/4 in. Sanitary FlangeOutlet: 3/4 in. Sanitary FlangeMax Operating Pressure: 80 psi @ 25 °C	description Chemistry: Polypropylene (PP)Inlet: 3/4 in. Sanitary FlangeOutlet: 3/4 in. Sanitary FlangeMax Operating Pressure: 80 psi @ 25 °C
fitting inlet sanitary flange, outlet sanitary flange, 19 mm (3/4 in.) inlet/outlet sanitary flange	fitting 38 mm (1 1/2 in.) inlet/outlet sanitary flange, outlet sanitary flange, inlet sanitary flange	fitting 19 mm (3/4 in.) inlet/outlet sanitary flange, outlet sanitary flange, inlet sanitary flange	fitting inlet sanitary flange, 19 mm (3/4 in.) inlet/outlet sanitary flange, outlet sanitary flange
material polypropylene , polypropylene housing, silicone seal, polypropylene support, polypropylene vent cap	material polypropylene housing, polypropylene vent cap, polypropylene support, silicone seal	material polypropylene , polypropylene support, polypropylene vent cap, polypropylene housing, silicone seal	material polypropylene support, polypropylene housing, silicone seal, polypropylene vent cap
impurities ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction), <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)	impurities ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction), <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)	impurities <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction), ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)	impurities ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction), <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
parameter 1.0 bar max. inlet pressure (15 psi) at 80 °C, 4.8 bar max. differential pressure (70 psid) at 20 °C, 25 °C max. inlet temp., 80 psig max. inlet pressure, 5.5 bar max. inlet pressure (80 psi) at 25 °C, 2.75 bar max. inlet pressure (40 psi) at 60 °C	parameter 5.5 bar max. inlet pressure (80 psi) at 25 °C, 25 °C max. inlet temp., 80 psig max. inlet pressure, 4.8 bar max. differential pressure (70 psid) at 20 °C, 1.0 bar max. inlet pressure (15 psi) at 80 °C, 2.75 bar max. inlet pressure (40 psi) at 60 °C	parameter 1.0 bar max. inlet pressure (15 psi) at 80 °C, 2.75 bar max. inlet pressure (40 psi) at 60 °C, 4.8 bar max. differential pressure (70 psid) at 20 °C, 5.5 bar max. inlet pressure (80 psi) at 25 °C, 80 psig max. inlet pressure, 25 °C max. inlet temp.	parameter 5.5 bar max. inlet pressure (80 psi) at 25 °C, 80 psig max. inlet pressure, 1.0 bar max. inlet pressure (15 psi) at 80 °C, 25 °C max. inlet temp., 4.8 bar max. differential pressure (70 psid) at 20 °C, 2.75 bar max. inlet pressure (40 psi) at 60 °C
pore size 5.0 μm nominal pore size, 5.0 μm pore size	pore size 5.0 μm pore size, 5.0 μm nominal pore size	pore size 100.0 μm nominal pore size, 100.0 μm pore size	pore size 0.3 μm pore size, 0.3 μm nominal pore size
cartridge nominal length 10 in. (25 cm)	cartridge nominal length 10 in. (25 cm)	cartridge nominal length 10 in. (25 cm)	cartridge nominal length 10 in. (25 cm)

Still not finding the right product?

Explore all of our products under Opticap^® XL10 Polygard^® CR

Hier finden Sie alle aktuellen Versionen:

Analysenzertifikate (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Dokumente section.

Wenn Sie Hilfe benötigen, wenden Sie sich bitte an Kundensupport

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.