Saltar al contenido
Merck

Lysozyme-triggered epidermal growth factor release from bacterial cellulose membranes controlled by smart nanostructured films.

Journal of pharmaceutical sciences (2014-10-14)
Guilherme Fadel Picheth, Maria Rita Sierakowski, Marco Aurelio Woehl, Lucy Ono, Axel Rulf Cofré, Luana Pasetti Vanin, Roberto Pontarolo, Rilton Alves De Freitas
RESUMEN

A novel wound-dressing biodevice, sensitive to lysozyme, an enzyme commonly found at infected skin wounds, was assembled by the layer-by-layer deposition of nanopolymeric chitosan and alginate films onto oxidized bacterial cellulose membranes incorporated with epidermal growth factor (EGF). Distinct EGF release profiles were obtained according to specific stimuli caused by infection. In in vitro conditions simulating noninfected wounds, the EGF rate and burst release effect were reduced by three deposited layers (Mt /M∞ of 0.25 at 3 h) in a process dependent on the porosity of the compact chitosan-alginate complex. The importance of the organized structure was revealed when an infected wound was simulated by adding lysozyme to the release medium, thus inducing the formation of a loosely polyelectrolyte architecture that caused rapid EGF diffusion (Mt /M∞ of 0.75 at 30 min). The results indicate that the nanopolymeric layers were capable of slowly releasing EGF as required for normal wound repair and rapidly undergoing architectural transitions that allow the diffusion of massive amounts of drug to enhance the process of re-epithelialization. In summary, the proposed system comprises the roles of both wound dressing and local delivery mechanism to recognize infections and respond with a burst of EGF release.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Ácido clorhídrico, ACS reagent, 37%
Sigma-Aldrich
Ácido acético, glacial, ACS reagent, ≥99.7%
Sigma-Aldrich
Hidróxido de sodio, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Ácido acético, glacial, ReagentPlus®, ≥99%
Sigma-Aldrich
Ácido clorhídrico, ACS reagent, 37%
Sigma-Aldrich
Hidróxido de sodio, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Sodium hypochlorite solution, reagent grade, available chlorine 4.00-4.99 %
Sigma-Aldrich
Hidróxido de sodio solution, 50% in H2O
Sigma-Aldrich
Cloruro de hidrógeno solution, 4.0 M in dioxane
Sigma-Aldrich
Sodium hypochlorite solution, reagent grade, available chlorine 10-15 %
Sigma-Aldrich
Hidróxido de sodio solution, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Ácido clorhídrico solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Ácido acético, glacial, ≥99.99% trace metals basis
Sigma-Aldrich
Hidróxido de sodio, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Hidróxido de sodio solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hidróxido de sodio, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Ácido acético solution, suitable for HPLC
Sigma-Aldrich
Ácido clorhídrico, 37 wt. % in H2O, 99.999% trace metals basis
Sigma-Aldrich
Hidróxido de sodio, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Ácido acético, glacial, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, 99.8-100.5%
Sigma-Aldrich
Ácido clorhídrico, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, ≥37%, APHA: ≤10
Sigma-Aldrich
Hidróxido de sodio, reagent grade, 97%, powder
Sigma-Aldrich
Ácido clorhídrico, 36.5-38.0%, BioReagent, for molecular biology
Sigma-Aldrich
Sodium bromide, ACS reagent, ≥99.0%
Sigma-Aldrich
Cloruro de hidrógeno solution, 2.0 M in diethyl ether
Sigma-Aldrich
TEMPO, 98%
Sigma-Aldrich
Ácido acético, glacial, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8%
Sigma-Aldrich
Ácido clorhídrico, meets analytical specification of Ph. Eur., BP, NF, fuming, 36.5-38%
Sigma-Aldrich
Hidróxido de sodio, pellets, semiconductor grade, 99.99% trace metals basis
Supelco
Ácido clorhídrico solution, volumetric, 0.1 M HCl (0.1N), endotoxin free