Skip to Content
Merck
  • Comparison of Aroma-Active Volatiles in Oolong Tea Infusions Using GC-Olfactometry, GC-FPD, and GC-MS.

Comparison of Aroma-Active Volatiles in Oolong Tea Infusions Using GC-Olfactometry, GC-FPD, and GC-MS.

Journal of agricultural and food chemistry (2015-08-11)
JianCai Zhu, Feng Chen, LingYing Wang, YunWei Niu, Dan Yu, Chang Shu, HeXing Chen, HongLin Wang, ZuoBing Xiao
ABSTRACT

The aroma profile of oolong tea infusions (Dongdingwulong, DDWL; Tieguanyin, TGY; Dahongpao, DHP) were investigated in this study. Gas chromatography-olfactometry (GC-O) with the method of aroma intensity (AI) was employed to investigate the aroma-active compounds in tea infusions. The results presented forty-three, forty-five, and forty-eight aroma-active compounds in the TGY, DHP, and DDWL infusions, including six, seven, and five sulfur compounds, respectively. In addition, the concentration of volatile compounds in the tea infusions was further quantitated by solid phase microextraction-gas chromatography (SPME)-GC-MS and SPME-GC-flame photometric detection (FPD). Totally, seventy-six and thirteen volatile and sulfur compounds were detected in three types of tea infusions, respectively. Quantitative results showed that forty-seven aroma compounds were at concentrations higher than their corresponding odor thresholds. On the basis of the odor activity values (OAVs), 2-methylpropanal (OAV: 230-455), 3-methylbutanal (1-353), 2-methylbutanal (34-68), nerolidol (108-184), (E)-2-heptenal (148-294), hexanal (134-230), octanal (28-131), β-damascenone (29-59), indole (96-138), 6-methyl-5-hepten-2-one (34-67), (R)-(-)-linalool (63-87), and dimethyl sulfide (7-1320) presented relatively higher OAVs than those of other compounds, indicating the importance of these compounds in the overall aroma of tea infusions.

MATERIALS
Product Number
Brand
Product Description

Supelco
SPME fiber assembly, Carbowax-Polyethylene Glycol (PEG) Coating, needle size 23 ga, df 60 μm(PEG, metal alloy fiber, for use with manual holder
Supelco
SPME fiber assembly, Carbowax-Polyethylene Glycol (PEG) Coating, needle size 23 ga, df 60 μm(PEG, for use with autosampler
Supelco
SPME fiber assembly Polydimethylsiloxane (PDMS), metal alloy fiber, df 100 μm(PDMS, needle size 23 ga, for use with autosampler
Supelco
SPME Fiber Assembly Polydimethylsiloxane/Divinylbenzene (PDMS/DVB), df 65 μm(PDMS/DVB, needle size 23 ga, PDMS/DVB StableFlex, for use with autosampler
Sigma-Aldrich
2-Pentylfuran, natural (US), ≥97%, FG
Sigma-Aldrich
Ethanethiol, ≥97%
Sigma-Aldrich
Butyl acetate, natural, ≥98%, FG
Sigma-Aldrich
Acetic acid, for luminescence, BioUltra, ≥99.5% (GC)
Sigma-Aldrich
(±)-Camphor, meets analytical specification of Ph. Eur., BP, racemic, ≥95% (GC)
Sigma-Aldrich
Ethanethiol, 97%
Sigma-Aldrich
trans,trans-2,4-Heptandienal, ≥88%
Sigma-Aldrich
Geraniol, ≥97%, FCC, FG
Sigma-Aldrich
Methional, ≥97%, FG
Sigma-Aldrich
Furfural, natural, ≥98%, FCC, FG
Sigma-Aldrich
Phenylacetaldehyde, ≥95%, FCC, FG
Sigma-Aldrich
Furfural, ≥98%, FCC, FG
Sigma-Aldrich
Furan, ≥99%
Sigma-Aldrich
(±)-Camphor, ≥95.5%
Sigma-Aldrich
Acetic acid, ≥99.5%, FCC, FG
Sigma-Aldrich
Acetic acid, natural, ≥99.5%, FG
Sigma-Aldrich
3-(Methylthio)-1-propanol, ≥98%, FG
Sigma-Aldrich
Acetaldehyde solution, 50 wt. % in ethanol
Sigma-Aldrich
Benzaldehyde, ≥98%, FG, FCC
Sigma-Aldrich
Benzaldehyde, natural, FCC, FG
Sigma-Aldrich
cis-4-Heptenal, ≥98%, stabilized, FCC, FG
Sigma-Aldrich
Methyl salicylate, ≥98%, FCC, FG
Sigma-Aldrich
trans,trans-2,4-Hexadienal, ≥80%
Sigma-Aldrich
Valeraldehyde, ≥97%, FG
Sigma-Aldrich
trans-2-Pentenal, ≥95%, FG
Sigma-Aldrich
Octanal, natural, ≥95%, FCC, FG