Skip to Content
Merck
  • Derivatization of bisphenol A and its analogues with pyridine-3-sulfonyl chloride: multivariate optimization and fragmentation patterns by liquid chromatography/Orbitrap mass spectrometry.

Derivatization of bisphenol A and its analogues with pyridine-3-sulfonyl chloride: multivariate optimization and fragmentation patterns by liquid chromatography/Orbitrap mass spectrometry.

Rapid communications in mass spectrometry : RCM (2015-07-28)
Jorge Regueiro, Andreas Breidbach, Thomas Wenzl
ABSTRACT

Due to the growing restrictions on the use of bisphenol A (BPA), several other bisphenols are gaining importance as substitutes for BPA in a variety of applications. There is, therefore, a real need for selective and sensitive methods based on mass spectrometry which will allow the human exposure to these new bisphenols to be assessed. Derivatization of BPA and its substitutes with pyridine-3-sulfonyl chloride is used to enhance the detection capability of bisphenols by electrospray ionization mass spectrometry. A multivariate experimental design, Box-Behnken response surface, was used to evaluate the influence of the main variables potentially affecting the derivatization yield. Fragmentation patterns for all the derivatized bisphenols were acquired by high-resolution/accurate-mass Orbitrap mass spectrometry. Temperature and pH were identified as the most important factors affecting the derivatization yield of bisphenols. Fragmentation of the protonated molecules produced abundant analyte-specific product ions. Most of the derivatized bisphenols showed significant improvements in their signal-to-noise ratios compared with the underivatized forms. The stability of these derivatives was demonstrated through several freeze/thaw cycles, short-term room temperature and long-term cold storage. Derivatization of BPA and its structural analogues with pyridine-3-sulfonyl chloride is proposed as a specific, sensitive, high-throughput approach to their analysis by liquid chromatography coupled to electrospray ionization mass spectrometry.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Hydrogen chloride solution, 3 M in cyclopentyl methyl ether (CPME)
Sigma-Aldrich
Methanol, SAJ special grade
Sigma-Aldrich
Sodium hydroxide solution, 4 M
Sigma-Aldrich
Sodium hydroxide solution, 7 M
Sigma-Aldrich
Sodium hydroxide solution, 1 M
Sigma-Aldrich
Sodium hydroxide solution, 6 M
Sigma-Aldrich
Hydrochloric acid solution, 0.5 M
Sigma-Aldrich
Hydrochloric acid solution, 12 M
Sigma-Aldrich
Hydrochloric acid solution, 2 M
Sigma-Aldrich
Hydrochloric acid solution, 1 M
Sigma-Aldrich
Hydrochloric acid solution, 6 M
Sigma-Aldrich
Sodium hydroxide solution, 0.01 M
Sigma-Aldrich
Hydrogen chloride – ethanol solution, 0.1 M in ethanol
Sigma-Aldrich
Sodium hydroxide solution, 0.05 M
Sigma-Aldrich
Hydrochloric acid solution, 0.2 M
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%, poly-coated bottles
Sigma-Aldrich
Sodium hydroxide solution, 0.2 M
Sigma-Aldrich
3-pyridinesulfonyl chloride hydrochloride, AldrichCPR
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, 99.93%
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sigma-Aldrich
Sodium hydroxide solution, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
4,4′-Sulfonyldiphenol, 98%
Sigma-Aldrich
Sodium carbonate, BioUltra, anhydrous, ≥99.5% (calc. on dry substance, T)
Sigma-Aldrich
Sodium hydroxide, BioUltra, for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
4,4′-(1-Phenylethylidene)bisphenol, 99%
Sigma-Aldrich
Sodium carbonate, anhydrous, powder, 99.999% trace metals basis
Sigma-Aldrich
Hydrochloric acid solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodium carbonate, BioXtra, ≥99.0%
Sigma-Aldrich
Hydrochloric acid, 36.5-38.0%, BioReagent, for molecular biology