MFVL06ST3

Durapore^® 0.1 µm, Millipak^® Final Fill Capsule

Millipak^® Final Fill 60

• UNSPSC Code: 23151806

Properties

• material: polysulfone device; polysulfone support
• Quality Level: 400
• agency: meets EP 2.6.14; meets JP 4.01; meets USP 85
• sterility: sterile; irradiated
• product line: Millipak^® Final Fill 60
• feature: hydrophilic
• manufacturer/tradename: Millipak^®
• parameter: 0.51 L/min flow rate at 0.69 bar (Δ P); 0.7 bar max. differential pressure (10 psi) at 25 °C (Reverse); 3.5 bar max. inlet pressure (50 psi) at 25 °C; 5.5 bar max. differential pressure (80 psi) at 25 °C (Forward)
• technique(s): sterile filtration: suitable
• filter filtration area: 300 cm²
• inlet connection diam.: 1.5 in. , sanitary flange
• outlet connection diam.: 1.5 in.
• impurities: <0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• matrix: Durapore^®
• pore size: 0.1 μm pore size
• bubble point: ≥4830 mbar (70 psi), air with water
• fitting: (38 mm (1½ in.) Sanitary Flange Inlet and Outlet)

Description

General description

Device Configuration: Gamma Gold Capsule

Packaging

Double Easy-Open Bag

Preparation Note

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP 788 Particulate Matter in Injections

Analysis Note

Bacterial Retention: Quantitative retention of 10⁷ CFU/cm² Brevundimonas diminuta ATCC^® 19146 per ASTM^® F838 methodology.

Other Notes

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer general guidelines section of user guide shipped with this product
• Storage Statement: Please refer user guide shipped with this product
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which is certified to ISO 9001:2015 Quality Management Systems.

Legal Information

ASTM is a registered trademark of American Society for Testing and Materials

ATCC is a registered trademark of American Type Culture Collection

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany