Skip to Content
MilliporeSigma
All Photos(1)

Documents

767514

Sigma-Aldrich

Tantalum

sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.95% trace metals basis

Synonym(s):

Ta

Sign Into View Organizational & Contract Pricing
All Photos(1)

About This Item

Empirical Formula (Hill Notation):
Ta
CAS Number:
7440-25-7
Molecular Weight:
180.95
EC Number:
231-135-5
MDL number:
MFCD00011252
UNSPSC Code:
12352103
PubChem Substance ID:
329767321
NACRES:
NA.23

vapor pressure

<0.01 mmHg ( 537.2 °C)

assay

99.95% trace metals basis

form

foil

autoignition temp.

572 °F

reaction suitability

core: tantalum

resistivity

13.5 μΩ-cm, 20°C

diam. × thickness

2.00 in. × 0.25 in.

bp

5425 °C (lit.)

mp

2996 °C (lit.)

density

16.69 g/cm3 (lit.)

SMILES string

[Ta]

InChI

1S/Ta

InChI key

GUVRBAGPIYLISA-UHFFFAOYSA-N

Application

Sputtering is a process whereby atoms are ejected from a solid target material due to bombardment of the target by energetic particles. The extreme miniaturization of components in the semiconductor and electronics industry requires high purity sputtering targets for thin film deposition.

Storage Class

11 - Combustible Solids

wgk_germany

nwg

flash_point_f

Not applicable

flash_point_c

Not applicable

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Kostantinidis; S.;
The European Physical Journal - Applied Physics, 56(2), 24002/1-24002/1 (2011)
Helmersson; U.;
Thin Solid Films, 513(1-2), 1-1 (2006)
Nilesh Patil et al.
Journal of biomedical materials research. Part B, Applied biomaterials, 89(1), 242-251 (2008-10-08)
Conventional porous-coated joint prostheses used in hip and knee reconstruction have demonstrated good clinical results, however, these implants possess some inherent shortcomings such as low volumetric porosity, suboptimal frictional characteristics, and higher modulus of elasticity relative to that of bone.
Robert Cohen
American journal of orthopedics (Belle Mead, N.J.), 31(4), 216-217 (2002-05-15)
Conventional materials used for orthopedic reconstruction implants limit the design of new and improved implants. Solid metal is rigid. Porous fixation surfaces have low volumetric porosity available for biologic ingrowth and low frictional characteristics for initial implant stability and have
Brett Levine et al.
The journal of knee surgery, 20(3), 185-194 (2007-08-02)
Porous tantalum represents an alternative metal for primary and revision total knee arthroplasty (TKA) with several unique properties. Tantalum is a transition metal, which in its bulk form has shown excellent biocompatibility and is safe to use in vivo as
View All Related Papers

Articles

Nanocomposite Coatings with Tunable Properties Prepared by Atomic Layer Deposition

Nanocomposite Coatings with Tunable Properties Prepared by Atomic Layer Deposition

Progress in Spintronic Materials

Spintronics offer breakthroughs over conventional memory/logic devices with lower power, leakage, saturation, and complexity.

Nanowire Synthesis: From Top-Down to Bottom-Up

The properties of many devices are limited by the intrinsic properties of the materials that compose them.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service