Skip to Content
MilliporeSigma
All Photos(1)

Documents

409456

Sigma-Aldrich

Tetrahydrofurfuryl methacrylate

contains 75 ppm HQ as inhibitor, 900 ppm MEHQ as inhibitor, 97%

Synonym(s):

(Tetrahydrofuran-2-yl)methyl methacrylate

Sign Into View Organizational & Contract Pricing
All Photos(1)

About This Item

Empirical Formula (Hill Notation):
C9H14O3
CAS Number:
2455-24-5
Molecular Weight:
170.21
EC Number:
219-529-5
MDL number:
MFCD00014515
UNSPSC Code:
12162002
PubChem Substance ID:
24865647
NACRES:
NA.23

assay

97%

form

liquid

contains

75 ppm HQ as inhibitor
900 ppm MEHQ as inhibitor

refractive index

n20/D 1.458 (lit.)

bp

52 °C/0.4 mmHg (lit.)

density

1.044 g/mL at 25 °C (lit.)

SMILES string

CC(=C)C(=O)OCC1CCCO1

InChI

1S/C9H14O3/c1-7(2)9(10)12-6-8-4-3-5-11-8/h8H,1,3-6H2,2H3

InChI key

LCXXNKZQVOXMEH-UHFFFAOYSA-N

Related Categories

Storage Class

10 - Combustible liquids

wgk_germany

WGK 2

flash_point_f

195.8 °F - closed cup

flash_point_c

91 °C - closed cup

ppe

Eyeshields, Gloves, multi-purpose combination respirator cartridge (US)

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

R Labella et al.
European journal of oral sciences, 106(3), 816-824 (1998-07-22)
Polymerisation shrinkage is widely recognised as a major drawback of resin based dental restoratives. Bis-GMA is often employed as the principal dimethacrylate monomer. Due to its high viscosity, Bis-GMA is normally mixed with large proportions of low viscosity glycol dimethacrylates.
P D Riggs et al.
Biomaterials, 21(4), 345-351 (2000-02-03)
A series of different methacrylate monomers (with either 1 or 2.5% dimethyl-p-toluidine, DMPT) was gelled with poly(ethyl methacrylate) powder (containing benzoyl peroxide) thus forming a room temperature curing system. When doped with 5.625% chlorhexidine diacetate the release from the tetrahydrofurfuryl
R Labella et al.
Biomaterials, 17(4), 431-436 (1996-02-01)
This study investigates the physical properties of a range of dental resins containing up to 30% by weight of tetrahydrofurfuryl methacrylate (THFMA). The principal monomer was 2,2-bis-(4(2-hydroxy-3-methacryloyloxypropoxy)-phenyl)-propane (bis-GMA) or 1,6-bis-(methacryloxy-2-ethoxycarbony lamino)-2,4,4-trimethyl-hexane (UDMA). Heat-cured resins were tested for Young's modulus, flexural
R M Wyre et al.
Biomaterials, 21(4), 335-343 (2000-02-03)
A polymer system consisting of poly(ethyl methacrylate)/tetrahydrofurfuryl methacrylate (PEMA/THFMA) was investigated as a biomaterial for cartilage repair using chondrocyte culture. The PEMA/THFMA system and Thermanox control were shown to support chondrocytes seeded directly onto the surface for up to 28
M P Patel et al.
Biomaterials, 22(1), 81-86 (2000-11-21)
The room temperature polymerising system poly(ethyl methacrylate) (PEM)/tetrahydrofurfuryl methcrylate (THFM) has been modified by replacing some of the THFM by hydroxyethyl methacrylate (HEMA) and hydroxypropyl methacrylate (HPM), respectively. In both cases, the equilibrium uptake of the parent system is reduced
View All Related Papers

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service