Unfortunately a photo of this product is not available. This membrane has a molecular weight cut-off of 14 kDa. As mentioned in the DESCRIPTION section under ' Preparation Note', it is recommended to remove glycerol by washing the tubing in running water for 3-4 hours. Removal of sulfur compounds can be accomplished by treating the tubing with a 0.3% (w/v) solution of sodium sulfide at 80°C for 1 minute. Wash with hot water (60°C) for 2 minutes, followed by acidification with a 0.2% (v/v) solution of sulfuric acid, then rinse with hot water to remove the acid. This tubing will retain most proteins of molecular weight 12,000 or greater.
D9277
Dialysis tubing cellulose membrane
avg. flat width 10 mm (0.4 in.)
Sign Into View Organizational & Contract Pricing
Select a Size
100 FT
R 3 987,62
R 3 987,62
List PriceR 4 069,00In StockDetails
All Photos(1)
Select a Size
Change View
100 FT
R 3 987,62
About This Item
UNSPSC Code:
41123100
NACRES:
NB.22
R 3 987,62
List PriceR 4 069,00In StockDetails
Recommended Products
avg. diam.
6 mm , when full
avg. flat width
10 mm (0.4 in.)
capacity
~10 mL/ft
Looking for similar products? Visit Product Comparison Guide
General description
Typical molecular weight cut-off = 14,000.
Packaging
Supplied in rolls, dry
Quality
May contain glycerin and sulfur compounds in more than trace amounts.
Preparation Note
Removal of glycerol included as a humectant can be accomplished by washing the tubing in running water for 3-4 hours. Removal of sulfur compounds can be accomplished by treating the tubing with a 0.3% (w/v) solution of sodium sulfide at 80°C for 1 minute. Wash with hot water (60°C) for 2 minutes, followed by acidification with a 0.2% (v/v) solution of sulfuric acid, then rinse with hot water to remove the acid. This tubing will retain most proteins of molecular weight 12,000 or greater.
Storage Class Code
11 - Combustible Solids
WGK
WGK 3
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Zhanna Ignatovich et al.
Molecules (Basel, Switzerland), 26(4) (2021-02-14)
Magnetic nanocomposites based on hydroxyapatite were prepared by a one-step process using the hydrothermal coprecipitation method to sinter iron oxides (Fe3O4 and γ-Fe2O3). The possibility of expanding the proposed technique for the synthesis of magnetic composite with embedded biologically active
Sunil Khatak et al.
Tuberculosis (Edinburgh, Scotland), 125, 102008-102008 (2020-10-16)
The present study aimed to formulate anti-tubercular drugs (Rifampicin, Isoniazid and Pyrazinamide) loaded solid lipid nanoparticles (ATDs-SLNs) using microemulsion technique for oral administration. Central composite designed (CCD) was applied to study the effect of stearic acid (X1), Compritol® 888 ATO
Related Content
Dialysis Tubing
-
Hello, could I receive more details about this product, including a picture? Is the MWCO 14 kDa? do they need a pre-treatment before use?
1 answer-
Helpful?
-
-
What is the Department of Transportation shipping information for this product?
1 answer-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Helpful?
-
-
What is the wall thickness of Product D9277, 10 mm (flat width) dialysis tubing?
1 answer-
The nominal dry wall thickness for Product D9277, 10 mm (flat width) dialysis tubing, is 51 micrometers.
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service
