Accéder au contenu
Merck

Reversed-phase Chromatography in an Extended Nanospace: Separating Amino Acids in Short and Long Nanochannels.

Analytical sciences : the international journal of the Japan Society for Analytical Chemistry (2015-11-13)
Adelina Smirnova, Hisashi Shimizu, Kazuma Mawatari, Takehiko Kitamori
RÉSUMÉ

Micro- and nanofluidics has attracted much attention, particularly concerning single-cell analysis when small amounts of liquids are examined. In present work we successfully fabricated extended-nano channels that were more narrow and shorter (2 mm) as well as wider and longer (10 mm), and accomplished a reversed-phase HPLC separation of labeled amino acids on these channels after octadecylsilylation (ODS). The separation performance characteristics were compared for both types of nano spaces. At an equal amount of pressure, the longer extended-nano channels showed permeability that was one-order higher (K = 47 × 10(-14) m(2)) and separation impedance (E = 13) that was one-order lower than that of the shorter version. Also, the separation plate number for the longer channel was 4000 with a plate height of 2.5 μm. Both channels have advantages for use in single-cell analysis. The longer channel can be applied for the separation of macromolecules (proteomics), while the short version is more applicable to small molecules (amino acids).

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Hydroxyde de sodium, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Toluène, ACS reagent, ≥99.5%
Sigma-Aldrich
Hydroxyde de sodium, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Hydroxyde de sodium solution, 50% in H2O
Sigma-Aldrich
Acétonitrile, ACS reagent, ≥99.5%
Sigma-Aldrich
Hydroxyde de sodium solution, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Acétonitrile, anhydrous, 99.8%
Sigma-Aldrich
Perchlorate de sodium monohydrate, ACS reagent
Sigma-Aldrich
Hydroxyde de sodium solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hydroxyde de sodium, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Hydroxyde de sodium, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Acide citrique, meets analytical specification of Ph. Eur., BP, USP, E330, anhydrous, 99.5-100.5% (based on anhydrous substance)
Sigma-Aldrich
Hydroxyde de sodium, reagent grade, 97%, powder
Sigma-Aldrich
Hydroxyde de sodium, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Toluène, anhydrous, 99.8%
Sigma-Aldrich
L-Proline, from non-animal source, meets EP, USP testing specifications, suitable for cell culture
Sigma-Aldrich
Toluène, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.7% (GC)
Sigma-Aldrich
Hydroxyde de sodium, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Sodium tetraborate, 99%
Sigma-Aldrich
L-Serine, ReagentPlus®, ≥99% (HPLC)
Sigma-Aldrich
Hydroxyde de sodium solution, 5.0 M
Sigma-Aldrich
Hydroxyde de sodium solution, 0.1 M
Sigma-Aldrich
Acide citrique, ACS reagent, ≥99.5%
Sigma-Aldrich
L-Alanine, ≥98% (TLC)
Sigma-Aldrich
Perchlorate de sodium monohydrate, puriss. p.a., ACS reagent, ≥98.0% (T)
Sigma-Aldrich
L-Serine, from non-animal source, meets EP, USP testing specifications, suitable for cell culture, 98.5-101.0%
Sigma-Aldrich
Hydroxyde de sodium, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
L-Valine, from non-animal source, meets EP, JP, USP testing specifications, suitable for cell culture, 98.5-101.0%
Sigma-Aldrich
Hydroxyde de sodium solution, 1 M
Sigma-Aldrich
Hydroxyde de sodium, beads, 16-60 mesh, reagent grade, 97%