Accéder au contenu
Merck
Toutes les photos(1)

Documents

V0CPAK0A1

Milli-Q

Polisseur VOC-Pak®

Production of volatile organic compound-free water at the point of dispense of the Milli-Q® IQ/EQ 7 series water purification systems.

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
Toutes les photos(1)

About This Item

Code UNSPSC :
41104212
eCl@ss :
33050190
Nomenclature NACRES :
JA.13

Matériaux

carbon cartridge (activated)

Niveau de qualité

300

Conditionnement

pkg of 1 unit

Fabricant/nom de marque

VOC-Pak®

Compatibilité

for use with Milli-Q® EQ 7000
for use with Milli-Q® EQ 7008
for use with Milli-Q® EQ 7016
for use with Milli-Q® IQ 7000
for use with Milli-Q® IQ 7003
for use with Milli-Q® IQ 7005
for use with Milli-Q® IQ 7010
for use with Milli-Q® IQ 7015

Conditions d'expédition

ambient

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Description générale

VOC-Pak® Polisher is designed to purify ultrapure water for the analysis of volatile organic compounds (VOCs) in GC and GC-MS analyses. The polisher is made up of activated carbon specifically designed for the effective removal of VOCs from ultrapure water. This unit is an excellent choice for scientists in need of VOC-free ultrapure water for their analytical applications.
VOC-Pak® Polisher produces VOC-free water when fed with ultrapure water at the Q-POD® point of dispense of Milli-Q® IQ 7000, Milli-Q® IQ 7003/05/10/15 and Milli-Q® EQ 7000/08/16 water purification systems.

Application

VOC-Pak® Polisher is used to produce VOC-free water for GC and GC-MS analyses when fed with ultrapure water. The VOC-free ultrapure water delivered is suitable for preparation of blanks, standard solutions, reagents and samples used in the analysis of those substances, or in situations where they may impact results, such as in electrochemistry studies.

Caractéristiques et avantages

  • Validated to produce 300 L of VOC-free ultrapure water.
  • Carefree maintenance: the polisher is easily installed and replaced
  • Redesigned bottom tip for a secured installation of the protection bell.
  • e-Sure tag for RFID connection with Q-POD® dispenser enables full traceability (data management) and automatic consumable status monitoring on the POD′s touchscreen interface.
  • Certificate of Quality available online.

Informations légales

Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-POD is a registered trademark of Merck KGaA, Darmstadt, Germany
VOC-PAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Souvent commandé avec ce produit

Réf. du produit
Description
Tarif

ZIQ7000T0C

Système de purification d'eau ultra pure Milli-Q® IQ 7000, output: type 1 water (18.2 MΩ·cm), the most advanced Milli-Q® ultrapure (Type 1) water purification system that is intelligent, intuitive, and green.

ZIQ7003T0C

Système de purification d'eau ultra pure et pure Milli-Q® IQ 7003, Produces ultrapure (Type 1) water and pure (Type 2) water with a production flow rate of 3 L/hr from tap water feed

ZIQ7005T0C

Système de purification d'eau ultra pure et pure Milli-Q® IQ 7005, Produces ultrapure (Type 1) water and pure (Type 2) water with a production flow rate of 5 L/hr from tap water feed.

ZIQ7010T0C

Système de purification d'eau ultra pure et pure Milli-Q® IQ 7010, Produces ultrapure (Type 1) water and pure (Type 2) water with a production flow rate of 10 L/hr from tap water feed.

ZIQ7015T0C

Système de purification d'eau ultra pure et pure Milli-Q® IQ 7015, Produces ultrapure (Type 1) water and pure (Type 2) water with a production flow rate of 15 L/hr from tap water feed.

Certificats d'analyse (COA)

Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Tong Sun et al.
Faraday discussions, 210(0), 173-188 (2018-07-07)
This paper is concerned with long-distance interactions between an unbiased metal nanoparticle (NP) and a nanoelectrode employed as a tip in the scanning electrochemical microscope (SECM). A NP immobilized on the inert substrate acts as a bipolar electrode, producing positive
Ran Chen et al.
Journal of the Electrochemical Society, 163(4), H3032-H3037 (2016-09-20)
Nanoscale scanning electrochemical microscopy (SECM) has emerged as a powerful electrochemical method that enables the study of interfacial reactions with unprecedentedly high spatial and kinetic resolution. In this work, we develop carbon nanoprobes with high electrochemical reactivity and well-controlled size
J S Cooper et al.
The Analyst, 140(9), 3233-3238 (2015-03-15)
Partially selective gold nanoparticle sensors have the sensitivity and selectivity to discriminate and quantify benzene, toluene, ethylbenzene, p-xylene and naphthalene (BTEXN) at concentrations relevant to the US Environmental Protection Agency. In this paper we demonstrate that gold nanoparticle chemiresistors can

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique