SLGP05010

Millex^® polyethersulfone inline filter

pore size 0.22 μm, diam. 50 mm, sterile, hydrophilic, 1/4-1/2 in. hose barb

• Synonyme(s) : 0.22 μm PES syringe filter, Express PLUS^™ PES in-line filter, Millex-GP in-line filter, Millex^®, Millex^® GP50, polyethersulfone syringe filter, sterile pressure filter unit
• Code UNSPSC : 41104922
• eCl@ss : 32031690
• Nomenclature NACRES : NB.22

Propriétés

• Matériaux: methacrylate-butadiene-styrene (MBS) housing; polyethersulfone membrane
• Niveau de qualité: 400
• Stérilité: γ-irradiated; sterile
• Gamme de produits: Millex^®
• Caractéristiques: holdup volume< 1 mL; hydrophilic
• Fabricant/nom de marque: Millex^®
• Paramètres: 3.3 bar max. inlet pressure (50 psi); 45 °C max. temp.; ~390 mL/min water flow rate at 15 psig
• Technique(s): pressure filtration: suitable; sterile filtration: suitable (sterilization of tissue culture media, protein solutions or aqueous solutions)
• Diamètre: 50 mm
• Surface de filtration: 19.6 cm² (3 in²)
• housing diam.: 62 mm
• inlet to outlet H: 72 mm
• Volume: 4000-8000 mL
• Matrice: Express PLUS^™
• Dimension de pores: 0.22 μm pore size
• Entrée: aqueous solution(s); tissue culture medium
• Raccords: inlet/outlet hose barb (1/4-1/2 in., with Female Luer slip interior)
• Conditions d'expédition: ambient

Description

Description générale

The bi-directionally supported Millex-GP₅₀ filter is a sterilizing filter for aqueous solutions. It removes microorganisms, particles, precipitates, and undissolved powders larger than 0.22 micron (μm). The sterile Millex-GP₅₀ filter is non-pyrogenic and non-toxic. This single-use product consists of a 0.22 μm membrane filter sealed in an acrylic housing.

Application

Sterile filtration of tissue culture media, additives,buffers, and water.

Notes préparatoires

• For use with peristaltic pump, a pump drive and pump head that delivers a constant speed of 60 revolutions per minute (rpm) is recommended. This generates an average flow rate of 100 mL/min.
• Recommended tubing: 4-9.5 mm I.D. silicone rubber or latex tubing

Autres remarques

• For use with peristaltic pump, a pump drive and pump head that delivers a constant speed of 60 revolutions per minute (rpm) is recommended. This generates an average flow rate of 100 mL/min.
• Recommended tubing: 4-9.5 mm I.D. silicone rubber or latex tubing

Informations légales

EXPRESS PLUS is a trademark of Merck KGaA, Darmstadt, Germany

Millex is a registered trademark of Merck KGaA, Darmstadt, Germany

Informations sur la sécurité

• Code de la classe de stockage: 10-13 - German Storage Class 10 to 13