XX4504700

HP Filter Holder, 47 mm, stainless steel

HP Filter Holder, 47mm, stainless steel

• Synonym(s): In-line Stainless steel filter holder
• UNSPSC Code: 41104909
• eCl@ss: 32031613
• NACRES: NB.24

Properties

• material: fluoroelastomer FKM seal; stainless steel
• Quality Level: 100
• parameter: 689 bar max. inlet pressure (10,000 psi)
• technique(s): pressure filtration: suitable
• H: 4.4 cm
• diam.: 8.6 cm
• filter diam.: 47 mm
• filtration area: 9.6 cm²
• fitting: 7/16 in. female inlet fitting (20 (UNF-3B)); 7/16 in. female outlet fitting (20 (UNF-3B))
• application(s): filtration
• compatibility: for use with In-Line Filter Holder
• shipped in: ambient

Description

General description

Applications:
In-Line Stainless Steel Filter Holders are commonly used for the filtration of gases or liquids at inlet pressures of 20 to 700 bar. Differential pressure depends on filter type used. All filter holders may be autoclaved (available in 25 mm and 47 mm).

Filter holder XX4404700 is equipped with a back-pressure support screen. It may be autoclaved with filter in-place, if PTFE-coated support screens, XX4404702 and XX4404704, are used.
- XX4204709, XX4304701, XX4404703, 5614, and 00907P are replacement parts for Filter Holder XX4404700.

Filter holder XX4504700 may be equipped with an upstream filter support screen, XX4504704, for back-pressure protection of filter.
- XX4504704, XX4504705, XX4504710, XX4504713, and XX45047RK are replacement parts for Filter Holder XX4504700.

Replacement parts for the 25mm SS Filter Holder are available as a kit under Catalog Number XX45025RK, which includes: (3) stainless steel hex-cap screws, (3) LCR-treated Buna-N O-rings (2-018), (1) stainless steel support screen, (1) Allen wrench.

Principle

Pressure