Skip to Content
MilliporeSigma
All Photos(3)

Documents

370959

Sigma-Aldrich

Lignin, alkali

Synonym(s):

Lignin, kraft

Sign Into View Organizational & Contract Pricing
All Photos(3)

About This Item

CAS Number:
8068-05-1
MDL number:
MFCD09039274
UNSPSC Code:
12162002
NACRES:
NA.23

description

surface tension 43 mN/m (1% aqueous)

form

powder

impurities

5% moisture

loss

13.4 wt. % loss on heating, @ 316°C
3.3 wt. % loss on heating, @ 149°C
5.7 wt. % loss on heating, @ 204°C
8.5 wt. % loss on heating, @ 260°C

pH

6.5 (25 °C, 5%, aqueous solution)

transition temp

sintering point 188 °C

solubility

NaOH: 0.05% (warm 5% aquesous)
MEK: partially soluble
benzene: insoluble
dioxane: soluble
ethylene glycol: soluble
hexane: insoluble
methanol: partially soluble

density

1.3 g/mL at 25 °C

bulk density

23 lb/cu.ft (loose)
32 lb/cu.ft (packed)

Looking for similar products? Visit Product Comparison Guide

Related Categories

General description

Lignin, alkali is a complex, three dimensional polymer that is also known as kraft lignin that has undergone hydrolytic degradation. It is one of the major components of lignocellulosic materials. Lignin is a major product for second generation bioethanol production and is an impurity in the separation of cellulose from wood.

Application

Lignin, alkali can be used as a surface treatment agent for composites of natural fibers with petroleum based resins. It can be used as a biosorbent for potential applications in removing toxic metal ions from wastewater.

Storage Class Code

11 - Combustible Solids

WGK

WGK 3

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Personal Protective Equipment

dust mask type N95 (US), Eyeshields, Gloves

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Dong Tian et al.
Biotechnology for biofuels, 10, 157-157 (2017-06-27)
Current single-stage delignification-pretreatment technologies to overcome lignocellulosic biomass recalcitrance are usually achieved at the expense of compromising the recovery of the polysaccharide components, particularly the hemicellulose fraction. One way to enhance overall sugar recovery is to tailor an efficient two-stage
Aiguo Wang et al.
Bioresource technology, 268, 505-513 (2018-08-17)
Maximizing the production of aromatic hydrocarbons from lignin conversion by coupling methane activation without solvent was investigated over Zn-Ga modified zeolite catalyst. The co-loading of Zn and Ga greatly improves lignin conversion, arene yield along with BTEX (i.e., benzene, toluene
Tanja Berger et al.
Folia microbiologica, 66(1), 87-98 (2020-09-26)
The potential of the culturable bacterial community from an Alpine coniferous forest site for the degradation of organic polymers and pollutants at low (5 °C) and moderate (20 °C) temperatures was evaluated. The majority of the 68 strains belonged to
Łukasz Klapiszewski et al.
Carbohydrate polymers, 94(1), 345-355 (2013-04-03)
A new method of synthesis of novel composites obtained from silica and Kraft lignin has been proposed. Silica used in the study was obtained by three methods (hydrolysis and condensation of tetraethoxysilane, precipitation in a nonpolar and polar medium with
Luaine Bandounas et al.
BMC biotechnology, 11, 94-94 (2011-10-15)
To expand on the range of products which can be obtained from lignocellulosic biomass, the lignin component should be utilized as feedstock for value-added chemicals such as substituted aromatics, instead of being incinerated for heat and energy. Enzymes could provide
View All Related Papers

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service