Saltar al contenido
Merck

Model for a solid-liquid stirred tank two-phase partitioning bioscrubber for the treatment of BTEX.

Journal of hazardous materials (2009-12-05)
Jennifer V Littlejohns, Kim B McAuley, Andrew J Daugulis
RESUMEN

A dynamic mathematical model has been developed to predict the performance of a stirred tank, solid-liquid two-phase partitioning bioreactor (SL-TPPB) for the treatment of benzene, toluene, ethylbenzene and o-xylene (BTEX) contaminated gases. The SL-TPPB system consists of an aqueous phase containing a bacterial consortium and a solid phase of silicone rubber beads (10%; v/v) with a high affinity for BTEX compounds. The silicone rubber beads serve to sequester and release BTEX according to thermodynamic equilibrium, which increases mass transfer from the gas phase and reduces aqueous phase concentrations of these toxic compounds during fluctuating inlet loadings. The model was developed from mass balances on BTEX components in the gas, aqueous and polymer phases, and biomass in the aqueous phase. Dynamic experimental data from this system were used to fit model parameters and to assess the accuracy of the model. A detailed estimability analysis of model parameters and initial conditions was completed to identify uncertain parameters that are most influential for the model predictions and to determine the parameters and initial conditions that should be targeted for estimation using the dynamic data. It was found that the developed model, with estimated parameters and initial conditions, has the ability to predict experimental off-gas BTEX concentrations with reasonable accuracy, which are the outputs of greatest importance.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Xilenos, histological grade
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad
Sigma-Aldrich
Xilenos, ACS reagent, ≥98.5% xylenes + ethylbenzene basis
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad
Sigma-Aldrich
o-Xylene, puriss. p.a., ≥99.0% (GC)
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad
Sigma-Aldrich
Xilenos, reagent grade
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad
Sigma-Aldrich
o-Xylene, reagent grade, ≥98.0%
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad
Supelco
o-Xylene, suitable for HPLC, 98%
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad
Sigma-Aldrich
Xilenos, SAJ special grade, ≥80.0%
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad
Sigma-Aldrich
Xilenos, SAJ first grade, ≥80.0%
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad
Sigma-Aldrich
o-Xylene, anhydrous, 97%
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad
Supelco
o-Xylene, analytical standard
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad
Sigma-Aldrich
o-Xylene, SAJ special grade, ≥98.5%
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad
Supelco
o-Xylene, Pharmaceutical Secondary Standard; Certified Reference Material
Número de referencia del producto (SKU)
Tamaño de envase
Disponibilidad
Precio
Cantidad