The only products that are compatible with the StripScan app read in pH increments of 1 rather than 0.5.
1.09533
Tiras indicadoras de pH pH 5,0 - 10,0
non-bleeding, colorimetric, pH range 5.0-10.0, graduations and accuracy accuracy: 0.5 pH unit, MQuant®
Sinónimos:
Tira de pH, pH 5,0 - 10,0, Tiras reactivas de pH, pH 5,0 - 10,0
About This Item
Productos recomendados
Agency
suitable for SM 5210
Nivel de calidad
Línea del producto
MQuant®
Características
non-bleeding
graduations and accuracy measuring range
accuracy: 0.5 pH unit
intervalo de pH
5.0-10.0
método de detección
colorimetric
temp. de almacenamiento
2-30°C
Descripción general
Ligadura / enlace
Nota de análisis
Información legal
Código de clase de almacenamiento
11 - Combustible Solids
Clase de riesgo para el agua (WGK)
nwg
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Protocolos
Determinación espectrofotométrica del bromo con dipropil-p-fenilendiamina (DPD) en agua potable, agua de piscinas, aguas residuales y disoluciones de desinfección en un intervalo de 0,020 a 10,00 mg/l.
Spectrophotometric determination of bromine with dipropyl-p-phenylenediamine (DPD) in drinking water, swimming-pool water, wastewater, and disinfection solutions in a range of 0.020 – 10.00 mg/L.
Spectrophotometric determination of bromine with dipropyl-p-phenylenediamine (DPD) in drinking water, swimming-pool water, wastewater, and disinfection solutions in a range of 0.020 – 10.00 mg/L.
Determinación espectrofotométrica del bromo con dipropil-p-fenilendiamina (DPD) en agua potable, agua de piscinas, aguas residuales y disoluciones de desinfección en un intervalo de 0,020 a 10,00 mg/l.
Contenido relacionado
This page is intended to make it easier to find the consumables you need based on the analytical method you’re using. Methods included on this page come from the EPA, Standard Methods and ASTM.
This page is intended to make it easier to find the consumables you need based on the analytical method you’re using. Methods included on this page come from the EPA, Standard Methods and ASTM.
This page is intended to make it easier to find the consumables you need based on the analytical method you’re using. Methods included on this page come from the EPA, Standard Methods and ASTM.
-
Do you have a Ph test strip for the 5.0 / 8.0 range that can discriminate by 0.5 Ph and works with the strip scan app?
1 answer-
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico