Saltar al contenido
Merck
Todas las fotos(2)

Documentos clave

Ver Toda la documentación

430234

Sigma-Aldrich

Bisphenol A diglycidyl ether, brominated

mol wt 350-450 g/epoxide by perchloric acid method

Sinónimos:

4,4′-(1-Methylethylidene)bis[2,6-dibromophenol] polymer with (chloromethyl)oxirane, 4,4′-(1-methylethylidene)bis(2,6-dibromophenol), Tetrabromobisphenol A-epichlorohydrin polymer

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(2)

About This Item

Número de CAS:
40039-93-8
MDL number:
MFCD03703563
UNSPSC Code:
12162002
NACRES:
NA.23

form

solid

Quality Level

100

mol wt

350-450 g/epoxide by perchloric acid method

extent of labeling

48 wt. % Br

viscosity

1,800 cSt(lit.)

mp

55-65 °C (lit.)

transition temp

softening point 55-65 °C (Durrans)

solubility

a variety of ketone, aromatic hydrocarbon and ether alcohol solvents: soluble

InChI

1S/C15H12Br4O2.C3H5ClO/c1-15(2,7-3-9(16)13(20)10(17)4-7)8-5-11(18)14(21)12(19)6-8;4-1-3-2-5-3/h3-6,20-21H,1-2H3;3H,1-2H2

InChI key

DEGGCMXJUHYWMD-UHFFFAOYSA-N

General description

Bisphenol A diglycidyl ether, brominated is a brominated epoxy resin that is used as a flame retardant material. It is majorly utilized as a combustible epoxy resin in the production of electronic printed boards.

Application

Imparts flame retardancy to molding, laminating and casting systems.

Physical properties

A non-sintering material, high bromine content, low softening point.

pictograms

Exclamation mark
GHS07

signalword

Warning

hcodes

H317,H319

Hazard Classifications

Eye Irrit. 2 - Skin Sens. 1

Storage Class

11 - Combustible Solids

wgk_germany

WGK 3

flash_point_f

235.4 °F - closed cup

flash_point_c

113 °C - closed cup

ppe

dust mask type N95 (US), Eyeshields, Faceshields, Gloves

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCW9355
MKCQ8198
MKCF7155
MKBX9424V
MKBN9812V

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

I Cavusoglu et al.
European journal of morphology, 39(5), 313-317 (2002-09-11)
Successful results of microwave polymerisation of different epoxy formulations have been reported in the literature. The present study was intended to shorten the time needed for polymerisation of epoxy resin by the use of a microwave technique. A standard double
C M Ayanoglou et al.
Journal of periodontal research, 32(7), 614-618 (1997-12-24)
The aim of the present investigation was to examine if new cementum (NC) formed during cyclosporin A (CsA) administration was maintained after suspension of the treatment. Thirty mg/kg/d of CsA were given to 3 male Sprague-Dawley rats. Three control rats
X-Y Zhai et al.
Kidney international, 72(6), 731-735 (2007-06-29)
Immunocytochemistry performed on paraffin or cryosections is often hampered by poor morphology. Epoxy sections, in contrast, generally retain well-preserved tissue architecture. Immunocytochemistry, however, on epoxy-embedded sections is difficult due in part to the plastic itself and to the fixation conditions.
G M Kim et al.
Journal of nanoscience and nanotechnology, 2(1), 55-59 (2003-08-12)
A means of accurate control of the curvature radius of molds that are used in nanostructure replication techniques is presented. The local non-uniform growth of SiO2 at regions with high curvature is used to fabricate molds with a curvature radius
Thermal decomposition of fire retardant brominated epoxy resins cured with different nitrogen containing hardeners
Luda MP, et al.
Polymer Degradation and Stability, 92(6), 1088-1100 (2007)
Ver todos los artículos relacionados

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico