Saltar al contenido
MilliporeSigma

Cost-Effective and Highly Photoresponsive Nanophosphor-P3HT Photoconductive Nanocomposite for Near-Infrared Detection.

Scientific reports (2015-11-17)
Yi Tong, Xinyu Zhao, Mei Chee Tan, Rong Zhao
RESUMEN

The advent of flexible optoelectronic devices has accelerated the development of semiconducting polymeric materials. We seek to replace conventional expensive semiconducting photodetector materials with our cost-effective composite system. We demonstrate in this work the successful fabrication of a photoconductive composite film of poly(3-hexylthiophene-2,5-diyl) (P3HT) mixed with NaYF4:Yb,Er nanophosphors that exhibited a ultrahigh photoresponse to infrared radiation. The high photocurrent measured was enabled by the unique upconversion properties of NaYF4:Yb,Er nanophosphors, where low photon energy infrared excitations are converted to high photon energy visible emissions that are later absorbed by P3HT. Here we report, a significant 1.10 × 10(5) times increment of photocurrent from our photoconductive composite film upon infrared light exposure, which indicates high optical-to-electrical conversion efficiency. Our reported work lays the groundwork for the future development of printable, portable flexible and functional photonic composites for light sensing and harvesting, photonic memory devices, and phototransistors.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Ácido trifluoroacético, ReagentPlus®, 99%
Sigma-Aldrich
Tolueno, ACS reagent, ≥99.5%
Sigma-Aldrich
Ácido trifluoroacético, puriss. p.a., suitable for HPLC, ≥99.0% (GC)
Sigma-Aldrich
Oleilamina, technical grade, 70%
Sigma-Aldrich
Ácido oleico, technical grade, 90%
Sigma-Aldrich
1-Octadecene, technical grade, 90%
Sigma-Aldrich
Tolueno, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.7% (GC)
Sigma-Aldrich
Ácido trifluoroacético, ≥99%, for protein sequencing
Sigma-Aldrich
Ácido oleico, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodium trifluoroacetate, 98%
Sigma-Aldrich
Tolueno, anhydrous, 99.8%
Sigma-Aldrich
Tolueno, ACS reagent, ≥99.5%
Sigma-Aldrich
Ácido oleico, natural, FCC
SAFC
Oleilamina, ≥98% (primary amine)
Sigma-Aldrich
Ácido oleico, meets analytical specification of Ph, Eur., 65.0-88.0% (GC)
Sigma-Aldrich
Tolueno, Laboratory Reagent, ≥99.3%
Sigma-Aldrich
Ácido oleico, ≥99% (GC)
Sigma-Aldrich
1-Octadecene, ≥95.0% (GC)
Sigma-Aldrich
Tolueno, SAJ first grade, ≥99.0%
Sigma-Aldrich
Tolueno, ACS reagent, ≥99.5%
Sigma-Aldrich
Tolueno, JIS special grade, ≥99.5%
Sigma-Aldrich
Yttrium, chips, 99.9% trace rare earth metals basis
Sigma-Aldrich
Ytterbium, powder, ≥99.9% trace rare earth metals basis
Supelco
Tolueno, HPLC grade, 99.8%
Sigma-Aldrich
Ácido trifluoroacético, SAJ special grade, ≥99.0%
Sigma-Aldrich
Ácido oleico, SAJ first grade, ≥70.0%
Sigma-Aldrich
Tolueno, JIS 300, for residue analysis, ≥99.8%
Ytterbium, lump, 25g, max. size 25mm, 99.9%
Sigma-Aldrich
Yttrium sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.9% trace metals basis
Yttrium, wire reel, 0.1m, diameter 0.5mm, 99.9%