The bulk density of this product is not determined.
G9382
Gelatin from bovine skin
gel strength ~225 g Bloom, Type B
Sinónimos:
Bovine gelatin
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Seleccione un Tamaño
100 G
$36.60
500 G
$123.00
1 KG
$223.00
Seleccione un Tamaño
Cambiar Vistas
100 G
$36.60
500 G
$123.00
1 KG
$223.00
About This Item
Productos recomendados
origen biológico
bovine skin
Nivel de calidad
tpo
Type B
Ensayo
≥95% protein basis (biuret)
Formulario
powder
técnicas
ELISA: suitable
cell culture | mammalian: suitable
immunocytochemistry: suitable
western blot: suitable
solubilidad
H2O: soluble 50 mg/mL
¿Está buscando productos similares? Visita Guía de comparación de productos
Componentes
Gelatin is a heterogeneous mixture of water-soluble proteins of high average molecular masses, present in collagen. Proteins are extracted by boiling the relevant skin, tendons, ligaments, bones, etc. in water. Type A gelatin is derived from acid-cured tissue. Type B is derived from lime-cured tissue.
Precaución
Dry gelatin, when stored in airtight containers at room temperature, will remain unchanged for many years. When heated at 100°C in the presence of air, it swells becomes soft and disintegrates to a carbonaceous mass with evolution of pyridine bases and ammonia.
Nota de preparación
This product is derived from bovine skin. Gelatin is soluble in hot than in cold water. It is practically insoluble in most organic solvents such as alcohol, chloroform, carbon disulfide, carbon tetrachloride, ether, benzene, acetone, and oils. The Bloom number, determined by the Bloom gelometer, is an indication of the strength of a gel formed from a solution of the known concentration. The Bloom number is proportional to the average molecular mass. Bloom numbers of porcine skin Gelatin vary from 90 to 300 g. This product has a gel strength of 225.
Código de clase de almacenamiento
11 - Combustible Solids
Clase de riesgo para el agua (WGK)
nwg
Punto de inflamabilidad (°F)
Not applicable
Punto de inflamabilidad (°C)
Not applicable
Equipo de protección personal
Eyeshields, Gloves, type N95 (US)
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
Lot/Batch Number
¿No ve la versión correcta?
Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
K A van der Lee et al.
Journal of lipid research, 41(1), 41-47 (2000-01-11)
Long-chain fatty acids are the most important substrates for the heart. In addition, they have been shown to affect signalling pathways and gene expression. To explore the effects of long-chain fatty acids on cardiac gene expression, neonatal rat ventricular myocytes
T H Kim et al.
Hepatology (Baltimore, Md.), 31(1), 75-82 (1999-12-29)
Partial hepatectomy triggers a variety of biological phenomena, which culminate in regeneration of the liver mass. Hepatocyte proliferation is a major feature of the regenerating liver after partial hepatectomy. Previous studies in our laboratory suggested that hepatic matrix remodeling might
Isolation and maintenance of symbiotic fungi of ants in the tribe Attini (Hymenoptera: Formicidae)
Silva-Pinhati A C O, et al.
Neotropical Entomology, 34, 1-5 (2005)
Ochuko L Erukainure et al.
Biomedicine & pharmacotherapy = Biomedecine & pharmacotherapie, 83, 1478-1484 (2016-10-25)
The immunomodulatory potentials of the crude methanolic extract and fractions [n-hexane (Hex), n-dichloromethane (DCM), ethyl acetate (EtOAc) and n-butanol (BuOH)] of Clerodendrum volubile flowers were investigated on whole blood phagocytic oxidative burst using luminol-amplified chemiluminescence technique. They were also investigated
Comparison of γ-radiation and electron beam irradiation effects on gelatin.
Vieira FF, et al.
Radiation Physics and Chemistry, 63, 331-332 (2002)
-
What is the bulk density of this product
1 answer-
Helpful?
-
-
What is the molecular weight of this Gelatin?
What is the molecular weight of this Gelatin?
1 answer-
The molecular weight of this product has not been evaluated, However, the molecular weight is closely related to the Bloom Number. The estimated ranges are as follows:
Bloom Number Average Molecular Mass (Da)
50−125 (Low Bloom) 20,000−25,000
175−225 (Medium Bloom) 40,000−50,000
225−325 (High Bloom) 50,000−100,000Please see the link below to review the general datasheet for Gelatin:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/333/625/g9382pis.pdfHelpful?
-
-
How to sterilize 2% solution?
1 answer-
This item can be sterilized by autoclaving at 121°C, 15 psi for 30 minutes.
Helpful?
-
-
Which is the molecular weight?
1 answer-
The Bloom number or gel strength of this product is ~225 g Bloom. The average molecular mass of 175-225 g Bloom (Medium Bloom) products is 40,000-50,000 Da. The average molecular mass of 225-325 g Bloom (High Bloom) products is 50,000-100,000 Da. Therefore, this product is expected to have a molecular weight of approximately 50 kDa.
For more information please view the product data sheet: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/187/614/g6650-et-al-pis-ms.pdf
Helpful?
-
-
Is this made from skin from a cow which was killed for the food chain?
1 answer-
All information that is shared regarding source can be found on a lot-specific Certificate of Origin (CofO, COO) for this product.
Helpful?
-
-
How does the storage temperature relate to shipping conditions?
1 answer-
The storage conditions that a Sigma-Aldrich catalog and label recommend for products are deliberately conservative. For many products, long-term storage at low temperatures will increase the time during which they are expected to remain in specification and therefore are labeled accordingly. Where short-term storage, shipping time frame, or exposure to conditions other than those recommended for long-term storage will not affect product quality, Sigma-Aldrich will ship at ambient temperature. The products sensitive to short-term exposure to conditions other than their recommended long-term storage are shipped on wet or dry ice. Ambient temperature shipping helps to control shipping costs for our customers. At any time, our customers can request wet- or dry-ice shipment, but the special handling is at customer expense if our product history indicates that the product is stable for regular shipment.
Helpful?
-
-
What is Product G9382, Gelatin from bovine skin, soluble in?
1 answer-
Gelatin is soluble in glycerol and acetic acid, and more soluble in hot water than in cold water. We test the solubility of gelatin in water at 50 mg/mL (with heat).
Helpful?
-
-
What is the Department of Transportation shipping information for this product?
1 answer-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Helpful?
-
-
What is a Bloom number, and how does it correlate with the molecular weight?
1 answer-
The Bloom number is indicative of gel strength. The Bloom number is the amount of pressure, in grams, required to break the surface of a 6.67% gel. The general rule of thumb in regards to an average molecular weight: High Bloom (225-325) = 50,000-100,000; Medium Bloom (175-225) = 40,000-50,000; Low Bloom (50-125) = 20,000-25,000. Product G9382 is a high Bloom preparation of approximately 225 Bloom.
Helpful?
-
-
What is the difference between type A and type B gelatin?
1 answer-
Type A gelatin is derived from acid-cured tissue whereas Type B gelatin is derived from lime-cured tissue. Type A gelatin has about 78-80 millimoles of free carboxyl groups per 100 g of protein and a pI of 7.9-9.0. Type B has 100-115 millimoles of free carboxyl groups per 100 g of protein and a pI of 4.7-5.2.
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
