FMLW02500

PTFE Membrane Filter, 5.0 μm Pore Size

Fluoropore^®, filter diam. 25 mm, hydrophobic

• Sinónimos: Fluoropore Membrane Filter
• NACRES: NB.24
• UNSPSC Code: 40161507
• Pore size: 5.0 μm pore size, ≥60 % porosity
• Material: PTFE membrane, gridded filter, white filter
• Feature: hydrophobic
• Diam.: 25 mm

Propiedades

• material: PTFE membrane, gridded filter, white filter
• feature: hydrophobic
• manufacturer/tradename: Fluoropore^®
• parameter: 0.82 L/min-cm² air flow rate at 0.028 psi, 130 °C max. temp. (Curling may occur at elevated temperatures), 236 mL/min-cm² liquid flow rate (27.5 in Hg (100% IPA))
• diam.: 25 mm
• filter diam.: 25 mm
• filter thickness: 254 μm , Typical
• pore size: 5.0 μm pore size, ≥60 % porosity
• bubble point: ≥0.07 bar (0.97 psi), 100% IPA

Descripción

General description

Unlike fibrous filter media that trap particles in their matrix, Fluoropore^® (hydrophobic PTFE) membranes collect particles on their surface, which make them ideal candidates for use in airborne particle monitoring applications. This surface collection provides better detection efficiencies and lower FWHM measurements. (FWHM is defined as the full width at half of the maximum height of the P0-218 peak obtained during sampling of room air.)

Choice of Pore Sizes:
Fluoropore membranes are available in 3 μm (FSLW) and 5 μm (FMLW) pore sizes - the smaller pore size provides low FWHM; the larger pore size has very low pressure drop and greater throughput capacity, which minimizes the number of filter changeouts.

Contrasting Backing Material:
The white backing of our FMLW filter is gridded to assist in identifying membrane orientation for the correct installation into sampling devices.

Features and Benefits

• High collection efficiency
• Extremely low pressure drop
• Higher throughput capacity
• Black backing ensures proper orientation

Legal Information

Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany