Saltar al contenido
MilliporeSigma

GF00548917

Platinum

foil, not light tested, 25x25mm, thickness 0.003mm, as rolled, 99.95%

Sinónimos:

Platinum, PT000204

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula empírica (notación de Hill):
Pt
Número de CAS:
Peso molecular:
195.08
Número MDL:
Código UNSPSC:
12141734
ID de la sustancia en PubChem:
NACRES:
NA.23
En este momento no podemos mostrarle ni los precios ni la disponibilidad

Ensayo

≥99.95%

Formulario

foil

fabricante / nombre comercial

Goodfellow 005-489-17

resistividad

10.6 μΩ-cm, 20°C

L × An × grosor

25 mm × 25 mm × 0.003 mm

bp

3827 °C (lit.)

mp

1772 °C (lit.)

densidad

21.45 g/cm3 (lit.)

cadena SMILES

[Pt]

InChI

1S/Pt

Clave InChI

BASFCYQUMIYNBI-UHFFFAOYSA-N

Descripción general

For updated SDS information please visit www.goodfellow.com.

Información legal

Product of Goodfellow

Código de clase de almacenamiento

13 - Non Combustible Solids

Clase de riesgo para el agua (WGK)

nwg

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.

Si necesita más asistencia, póngase en contacto con Atención al cliente

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Yasar F Mansour et al.
Acta odontologica Scandinavica, 64(4), 231-236 (2006-07-11)
To quantify luting cement at the crown-tooth interface of esthetic crowns fabricated using four different techniques and two methods of excess cement removal. Four methods of crown fabrication were used: the feldspathic porcelain and platinum foil technique, the feldspathic porcelain
Maurice Y Mommaerts et al.
Child's nervous system : ChNS : official journal of the International Society for Pediatric Neurosurgery, 19(4), 211-216 (2003-04-26)
Our hypothesis was that a neurocranial suture autograft will, when shielded from dura, grow and be incorporated into the calvarium. Growth was monitored by marker separation in three isohistogenic groups of rabbits, between postnatal days 9 and 90. In order
Christian Henle et al.
Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Annual Conference, 2008, 4208-4211 (2009-01-24)
A laser technology for manufacturing implantable electrode arrays, using spin-on polydimethylsiloxane (PDMS) and platinum foil as materials, was investigated in respect to its scaling limitations. The following aspects were analyzed: Minimal width and centre-to-centre distance of platinum tracks, the ability
Martin Schuettler et al.
Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Annual Conference, 2009, 1612-1615 (2009-12-08)
An easy and fast method for fabrication of neural electrode arrays is the patterning of platinum foil and spin-on silicone rubber using a laser. However, the mechanical flexibility of such electrode arrays is limited by the integrated tracks that connect
Dalia Nayak et al.
Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine, 57(4), 483-489 (2002-10-04)
Heavy ion activation of natural gold foil with a 7Li beam results in the formation of carrier-free 199-201Pb radionuclides along with their corresponding decay products, 199-201Tl, in the matrix. At 49 MeV projectile energy, the production of 199Tl through its

Questions

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico