Unfortunately, the number of repeat units is not determined. The inherent and reduced viscosities are 0.512 and 0.526 dL/g, respectively. The viscosities are measured by dissolving the product in concentrated sulfuric acid to form a solution with a concentration of 0.0998 g/dL at 25°C.
667846
BBL
Sinónimos:
BBL
Seleccione un Tamaño
About This Item
Productos recomendados
description
Band gap: 1.9 eV
Quality Level
form
solid
orbital energy
HOMO -5.9 eV
LUMO -4.0 eV
OPV device performance
ITO/MEH-PPV/BBL/Al
- Short-circuit current density (Jsc): 1.98 mA/cm2
- Open-circuit voltage (Voc): 0.93 V
- Fill Factor (FF): 0.47
- Power Conversion Efficiency (PCE): 1.1 %
ITO/PPV/BBL/Al
- Short-circuit current density (Jsc): 2.15 mA/cm2
- Open-circuit voltage (Voc): 1.1 V
- Fill Factor (FF): 0.5
- Power Conversion Efficiency (PCE): 1.5 %
semiconductor properties
N-type (mobility=0.1 cm2/V·s)
P-type (mobility=0.4 cm2/V·s)
Storage Class
11 - Combustible Solids
wgk_germany
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
ppe
Eyeshields, Gloves, type N95 (US)
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Artículos
The development of high-performance conjugated organic molecules and polymers has received widespread attention in industrial and academic research.
Intrinsically stretchable active layers for organic field-effect transistors (OFET) are discussed. Polymer structural modification & post-polymerization modifications are 2 methods to achieve this.
Fabrication procedure of organic field effect transistor device using a soluble pentacene precursor.
Thin, lightweight, and flexible electronic devices meet widespread demand for scalable, portable, and robust technology.
-
Hello, What is the number of repeat unit or viscosity of this polymer?
1 answer-
Helpful?
-
-
Is there any molecular weight information available for the BBL polymer (item # 667846)?
1 answer-
The molecular weight for this product is not determined. However, historical data suggest that it is 304.2 g/mol.
Helpful?
-
-
Hello, what is the viscosity (or number of repeat units) of this polymer?
1 answer-
The viscosity of this material is not tested on a lot-to-lot basis. However, historical data indicates an intrinsic viscosity of approximately 1.6 dl/g in Methanesulfonic acid at 25°C.
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico