Saltar al contenido
MilliporeSigma
Todas las fotos(1)

Documentos

180882

Sigma-Aldrich

Poly(acrylonitrile-co-butadiene-co-styrene)

acrylonitrile ~40 wt. %, powder

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Fórmula lineal:
[CH2CH(CN)]x(CH2CH=CHCH2)y[CH2CH(C6H5)]Z
Número de CAS:
9003-56-9
MDL number:
MFCD00133993
UNSPSC Code:
12162002
PubChem Substance ID:
24850905

form

powder

composition

acrylonitrile, ~40 wt. %

solubility

acetone, MEK and DMF: soluble
water and alcohols: insoluble

density

1.04 g/mL at 25 °C

SMILES string

C=CC=C.C=CC#N.C=Cc1ccccc1

¿Está buscando productos similares? Visita Guía de comparación de productos

Features and Benefits

High butadiene content.

Storage Class

11 - Combustible Solids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves, type N95 (US)

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

David Kittle et al.
Medical physics, 35(12), 5708-5712 (2009-01-30)
Three dimensional grid phantoms offer a number of advantages for measuring imaging related spatial inaccuracies for image guided surgery and radiotherapy. The authors examined the use of rapid prototyping technology for directly fabricating 3D grid phantoms from CAD drawings. We
Woo-Hyuk Jung et al.
Environmental science & technology, 43(7), 2563-2568 (2009-05-21)
Cellular phone housings were ground to make original particulates using a knife mill. Foams and adhesives with a lighter density than water were removed from ground mixtures using a sink-float process in water; ground metals, button rubbers, and wires were
Chia-Yuan Chang et al.
Bioresource technology, 102(9), 5337-5344 (2011-01-18)
A two-stage aerobic membrane bioreactor (MBR) system for treating acrylonitrile butadiene styrene (ABS) resin wastewater was carried out in this study to evaluate the system performance on nitrification. The results showed that nitrification of the aerobic MBR system was significant
Bo Lai et al.
Huan jing ke xue= Huanjing kexue, 32(4), 1055-1059 (2011-07-02)
Wastewater from the condensation and drying section of acrylonitrile-butadiene-styrene (ABS) resin plant was pretreated by the microelectrolysis, and the effect of the influent pH value on the pollution removal efficiency of the microelectrolysis was mainly studied. In order to study
P Jyotishkumar et al.
The journal of physical chemistry. B, 113(16), 5418-5430 (2009-04-01)
The epoxy system containing diglycidyl ether of bisphenol A and 4,4'-diaminodiphenyl sulfone is modified with poly(acrylonitrile-butadiene-styrene) (ABS) to explore the effects of the ABS content on the phase morphology, mechanism of phase separation, and viscoelastic properties. The amount of ABS
Ver todos los artículos relacionados

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico