Skip to Content
MilliporeSigma
  • Daily roadside BTEX concentrations in East Asia measured by the Lanwatsu, Radiello and Ultra I SKS passive samplers.

Daily roadside BTEX concentrations in East Asia measured by the Lanwatsu, Radiello and Ultra I SKS passive samplers.

The Science of the total environment (2012-11-13)
Tran Thi Ngoc Lan, Nguyen Thi Thanh Binh
PMID23142415
ABSTRACT

A new home-made diffusive bag-type passive sampler called Lanwatsu was developed for benzene, toluene, ethylbenzene and xylene monitoring in roadside air. The passive samplers were outdoor validated and deployed together with two commercial passive samplers, Ultra I SKC Inc. and Radiello, for daily roadside air monitoring in East Asian cities including HoChiMinh, Hanoi, Cantho, Danang, Vungtau, Hue (Vietnam), Kuala Lumpur (Malaysia), Kyoto, Osaka (Japan), Nanjing (China) and Singapore in 2011. High daily benzene concentrations of 87, 52, 32, 23, 13, 12 and 48 µg/m³ were observed in HoChiMinh, Hanoi, Cantho, Danang, Hue, Vung Tau (Vietnam), and Kuala Lumpur (Malaysia), respectively. Kyoto and Osaka (Japan) were clean with daily benzene concentrations below 2.3 μg/m³. The daily benzene concentrations in Nanjing (China) and Singapore were 5.6 and 6.9 μg/m³, respectively. The three passive samplers were equivalent. Passive sampling by the Lanwatsu passive sampler is acceptable for daily outdoor benzene monitoring.

MATERIALS
Product Number
Brand
Product Description
RAD195
radiello™ Clips, suspending Radiello triangular support plate, pk of 20
RAD1201
radiello™ Diffusive Bodies, blue, configured for sampling light sensitive compounds, pk of 20
RAD171
Supelco
radiello™ Methylene Blue Calibration Standard for H2S (Hydrogen Sulfide), pkg of 100 mL
RAD1991
radiello™ Empty Storage Tubes, glass (with stopper), volume 2.8 mL, pk of 100
RAD1202
radiello™ Diffusive Bodies, yellow, configured for reduced sampling rates, pk of 20
RAD145S
radiello™ BTEX/VOC Starter Kit, Thermal Desorption
RAD130S
radiello™ BTEX/VOC Starter Kit, CS2 Desorption
RAD126
radiello™ On-Field Thermometer, Includes one standard Radiello vertical adapter (RAD122) for each thermometer, configured for standard use, pk of 3
RAD120
radiello™ Diffusive Bodies, white, configured for general use, pk of 20
RAD127
radiello™ On-Field Thermometer, Reader, pk of 1
RAD1992
radiello™ Empty Storage Tubes, polypropylene (with stopper), volume 12 mL, pk of 100
RAD1203
radiello™ Diffusive Bodies, permeative, configured for anaesthetic gases and vapors, pk of 20
RAD407
Supelco
radiello™ BTEX Calibration Kit (Thermal Desorption)
RAD174
radiello™ Filtration Kit, pk of 20
RAD405
Supelco
radiello™ BTEX Calibration Kit (CS2 Desorption)
RAD141S
radiello™ 1,3-Butadiene Starter Kit, Thermal Desorption, pkg of 1 kit (2 RAD141 adsorbing cartridges and barcode labels, 1 RAD1202 yellow diffusive body, 1 RAD121 triangular support plate, 1 instruction sheet)
RAD170S
radiello™ Hydrogen Sulfide Starter Kit
RAD198
radiello™ Replacement Mounting Strips, for use with Radiello Outdoor Shelter, pk of 100
RAD196
radiello™ Outdoor Shelter, pk of 10
RAD130
radiello™ Cartridge Adsorbents, for sampling BTEX and VOCs (CS2 Desorption), matrix SS net (100 mesh, 5.8 mm diam.), activated with activated charcoal (30-50 mesh), pk of 20
RAD132
radiello™ Cartridge Adsorbents, for sampling Anaesthetic Gases/Vapors, matrix SS net with mix of mol sieve and activated charcoal (30-50 mesh), pk of 20
RAD145
radiello™ Cartridge Adsorbents, for sampling BTEX and VOCs (thermal desorption), matrix SS net (3 x 8 μm, 4.8 mm diam.), Carbograph, pk of 20
RAD121
radiello™ Triangular Support Plate, pk of 20
RAD190
radiello™ Barcode Labels, pk of 198
RAD122
radiello™ Vertical Adapter, threaded for standard use, pk of 20
RAD168
radiello™ Cartridge Adsorbents, for sampling Ammonia (NH3), matrix microporous PE impregnated with phosphoric acid, pk of 20
RAD165
radiello™ Cartridge Adsorbents, for sampling Aldehydes, matrix SS net with 2,4-DNPH coated FLORISIL®, pk of 20
RAD125
radiello™ Anesthetic Gases and Vapor Sampler