If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf
19160
SOD Assay Kit
sufficient for 500 tests
Synonym(s):
Superoxide dismutase Assay Kit
About This Item
Recommended Products
usage
sufficient for 500 tests
Quality Level
availability
not available in USA
technique(s)
UV/Vis spectroscopy: suitable
suitability
corresponds for UV test (WST reagent, WST formazan)
use tested
storage temp.
2-8°C
General description
Application
signalword
Danger
hcodes
pcodes
Hazard Classifications
Resp. Sens. 1
Storage Class
10 - Combustible liquids
flash_point_f
Not applicable
flash_point_c
Not applicable
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
-
How can I determine the shelf life / expiration / retest date of this product?
1 answer-
Helpful?
-
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 answer-
Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
Helpful?
-
-
Hello, Please what is the quantity of cell sample is required for use in this kit ?
1 answer-
The recommended number of cells is 9x10*6 for adherent lines. Leukocytes have been tested successfully at 1.2x10*7 cells. Please see the link below to review the product datasheet:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/254/301/19160dat.pdfHelpful?
-
-
Can we use that kit without having SOD? And the shiping can be done at room temperature and put in fridge after reception?
1 answer-
The superoxide dismutase (SOD) is required for preparation of an inhibition curve. This is a SOD inhibitory assay kit. See SOD product S7571, which is suggested for use with this kit. This kit is shipped on wet ice to preserve the quality of the transit. Upon receipt, the item should be stored at 2-8°C. If the interest is in calculating SOD activity in a sample, product CS0009 may be a kit of interest. See the links below to review additional information.
S7571, Superoxide Dismutase
https://www.sigmaaldrich.com/product/sigma/s757119160 SOD Assay Kit protocol:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/254/301/19160dat.pdfCS0009 SOD Activity Assay Kit
https://www.sigmaaldrich.com/product/sigma/cs0009Helpful?
-
-
Hello, Please what is the quantity of tissue sample is required for use in this kit
1 answer-
This product is not routinely tested for use with solid tissue samples. However, the following general preparation method for 100 mg of tissue is recommended:
1. Rinse the tissue with saline solution to remove residual blood, then gently dab the tissue with paper towels before proceeding to weigh it.
2. Add 400-900 ml of sucrose buffer (0.25 M sucrose, 10 mM Tris, 1 mM EDTA, pH 7.4) and use a Teflon homogenizer to process the sample. If needed, subject the homogenized sample to sonication on an ice bath (60W with 0.5 second intervals for 15 min).
3. Centrifuge the homogenized sample at 10,000 g for 60 min at 4ºC then carefully transfer the resulting supernatant to a new tube for measurement.Helpful?
-
-
What is the SOD concentration?
1 answer-
As per the protocol of 19160: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/254/301/19160dat.pdf, the kit doesn't include SOD standard, that is to say, the SOD standard needs to be purchased separately. As shown on page 2 of the protocol, if assay monitoring is required, the SOD standard should be diluted in the range of 0.001-200 U/mL, indicating the detection range of the kit is 0.001-200 U/mL.
Helpful?
-
-
Where can we find the protocol for analysis? Online
1 answer-
The protocol can be located towards the bottom of the product detail page, under "Data Sheets".
Please see this copy of the data sheet: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/254/301/19160dat.pdf.Helpful?
-
-
When using Product 19160, SOD Assay Kit, how do I prepare a Superoxide Dismutase (SOD) working solution?
1 answer-
Dilute SOD with Dilution Buffer to prepare SOD standard Solutions if necessary for assay monitoring as follows: 200 U/mL, 100 U/mL, 50 U/mL, 20 U/mL, 10 U/mL, 5 U/mL, 1 U/mL, 0.1 U/mL, 0.05 U/mL, 0.01 U/mL, and 0.001 U/mL.
Helpful?
-
-
What is the Department of Transportation shipping information for this product?
1 answer-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Helpful?
-
-
How do I prepare a WST working solution for Product 19160, SOD Assay Kit (Superoxide dismutase)?
1 answer-
Dilute 1mL of WST Solution with 19mL of Buffer Solution.
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service