跳轉至內容
Merck

Degradable polyethylene: fantasy or reality.

Environmental science & technology (2011-04-19)
Prasun K Roy, Minna Hakkarainen, Indra K Varma, Ann-Christine Albertsson
摘要

Plastic waste disposal is one of the serious environmental issues being tackled by our society today. Polyethylene, particularly in packaging films, has received criticism as it tends to accumulate over a period of time, leaving behind an undesirable visual footprint. Degradable polyethylene, which would enter the eco-cycle harmlessly through biodegradation would be a desirable solution to this problem. However, the "degradable polyethylene" which is presently being promoted as an environmentally friendly alternative to the nondegradable counterpart, does not seem to meet this criterion. This article reviews the state of the art on the aspect of degradability of polyethylene containing pro-oxidants, and more importantly the effect these polymers could have on the environment in the long run. On exposure to heat, light, and oxygen, these polymers disintegrate into small fragments, thereby reducing or increasing the visual presence. However, these fragments can remain in the environment for prolonged time periods. This article also outlines important questions, particularly in terms of time scale of complete degradation, environmental fate of the polymer residues, and possible accumulation of toxins, the answers to which need to be established prior to accepting these polymers as environmentally benign alternatives to their nondegradable equivalents. It appears from the existing literature that our search for biodegradable polyethylene has not yet been realized.

材料
產品編號
品牌
產品描述

Sigma-Aldrich
聚乙烯, Ultra-high molecular weight, surface-modified, powder, 34-50 μm particle size
Sigma-Aldrich
聚乙烯, average Mw ~4,000 by GPC, average Mn ~1,700 by GPC
Sigma-Aldrich
聚乙烯, low density, melt index 25 g/10 min (190°C/2.16kg)
Sigma-Aldrich
聚乙烯, Ultra-high molecular weight, average Mw 3,000,000-6,000,000
Sigma-Aldrich
聚乙烯, High density, melt index 12 g/10 min (190 °C/2.16kg)
Sigma-Aldrich
聚乙烯, Linear low density, melt index 1.0 g/10 min (190°C/2.16kg)
Sigma-Aldrich
聚乙烯, Medium density
Sigma-Aldrich
聚乙烯, Ultra-high molecular weight, surface-modified, powder, 125 μm avg. part. size
Sigma-Aldrich
聚乙烯, High density, melt index 2.2 g/10 min (190 °C/2.16kg)
聚乙烯 (LDPE), ERM®, certified reference material
Supelco
聚乙烯, analytical standard, for GPC, 2,000