跳轉至內容
Merck
  • Adhesion and biofilm formation by periodontopathogenic bacteria on different commercial brackets.

Adhesion and biofilm formation by periodontopathogenic bacteria on different commercial brackets.

European journal of paediatric dentistry : official journal of European Academy of Paediatric Dentistry (2013-12-04)
C Passariello, P Gigola
摘要

To compare early bacterial adhesion and biofilm formation of common and uncommon periodontal pathogens on a variety of commercial brackets in vitro. In vitro adhesion and biofilm formation of 4 bacterial strains on 15 different commercial brackets, in standard culture mediums with and without addition of either serum or human saliva was evaluated by quantitative real time PCR after extraction of bacterial DNA. Materials significantly influenced bacterial adhesiveness in a species-specific way. Titanium and gold brackets constantly yielded the lowest values with all tested bacteria and in all tested conditions. Bracket materials and medium of growth significantly influenced biofilm formation. Materials and environmental conditions significantly influence biofilm formation by periodontal pathogens at the surface of brackets. Whenever possible brackets should be kept far from the gingival margin and if this is not possible, brackets made of gold, titanium, and ceramic should be preferentially used.

材料
產品編號
品牌
產品描述

Sigma-Aldrich
氧化铝, standard grade, Brockmann I, activated, basic
Sigma-Aldrich
氧化铝, activated, Brockmann I, standard grade, neutral
Sigma-Aldrich
氧化铝, powder, 99.99% trace metals basis
Sigma-Aldrich
氧化铝, Brockmann I, standard grade, activated, acidic
Sigma-Aldrich
氧化铝, powder, primarily α phase, ≤10 μm avg. part. size, 99.5% trace metals basis
Sigma-Aldrich
氧化铝, nanopowder, <50 nm particle size (TEM)
Sigma-Aldrich
氧化铝, nanoparticles, <50 nm particle size (DLS), 20 wt. % in isopropanol
Sigma-Aldrich
氧化铝, Corundum, α-phase, -100 mesh
Sigma-Aldrich
钛, foil, thickness 0.127 mm, 99.7% trace metals basis
Sigma-Aldrich
氧化铝, pellets, 3 mm
Sigma-Aldrich
钛, powder, <45 μm avg. part. size, 99.98% trace metals basis
Sigma-Aldrich
氧化铝, fused, powder, primarily α-phase, -325 mesh
Sigma-Aldrich
氧化铝, nanopowder, 13 nm primary particle size (TEM), 99.8% trace metals basis
Sigma-Aldrich
氧化铝, 99.997% trace metals basis
Sigma-Aldrich
钛, foil, thickness 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
氧化铝, Type WN-6, Neutral, Activity Grade Super I
Sigma-Aldrich
氧化铝, pore size 58 Å, ~150 mesh
Sigma-Aldrich
氧化铝, nanoparticles, 30-60 nm particle size (TEM), 20 wt. % in H2O
Sigma-Aldrich
钛, powder, −100 mesh, 99.7% trace metals basis
Sigma-Aldrich
氧化铝, fused, powder, primarily α-phase, 100-200 mesh
Sigma-Aldrich
氧化铝, single crystal substrate, <0001>
Sigma-Aldrich
氧化铝, nanowires, diam. × L 2-6 nm × 200-400 nm
Sigma-Aldrich
介孔氧化铝, MSU-X (wormhole), average pore size 3.8 nm
Sigma-Aldrich
氧化铝, Brockmann I, standard grade, activated, neutral, free-flowing, Redi-Dri
Sigma-Aldrich
钛, wire, diam. 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
钛, sponge, 1-20 mm, 99.5% trace metals basis
Sigma-Aldrich
氧化铝, Brockmann I, activated, standard grade, free-flowing, Redi-Dri
Sigma-Aldrich
钛, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
钛, foil, thickness 2.0 mm, 99.7% trace metals basis
Sigma-Aldrich
钛, foil, thickness 0.5 mm, 99.99% trace metals basis