PTFE membranes have a maximum temperature limit of 130 °C. For applications requiring higher temperature ranges, Glass Fiber filters are recommended.
FGLP01300
PTFE Membrane Filter, 0.22 μm Pore Size
Fluoropore®, hydrophobic
Synonym(s):
Fluoropore Membrane Filter
Sign In to View Organizational & Contract Pricing.
Select a Size
Change View
| Size/SKU | Availability | Price |
|---|
About This Item
UNSPSC Code:
40161507
NACRES:
NB.24
eCl@ss:
32031602
Pore size:
0.22 μm pore size, 85 % porosity
Material:
PTFE membrane, plain filter, white filter
Feature:
hydrophobic
Diam.:
13 mm
Sterility:
non-sterile
Pricing and availability is not currently available.
material
PTFE membrane, plain filter, white filter
sterility
non-sterile
feature
hydrophobic
manufacturer/tradename
Fluoropore®, Millipore
sustainability
Greener Alternative Product
parameter
130 °C max. temp., 24 mL/min-cm2 water flow rate, 5 L/min-cm2 air flow rate
diam.
13 mm
filter diam.
13 mm
thickness
150 μm
gravimetric extractables
0.5%
matrix
Fluoropore®
pore size
0.22 μm pore size, 85 % porosity
bubble point
≥1.0 bar, air with methanol at 23 °C
greener alternative category
shipped in
ambient
General description
Filter Code: FGLP
Filter Type: Screen filter
Our Fluoropore® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency. (Please note that catalogue numbers containing "FHUP" are unlaminated, or produced without a backing.)
Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions.
Features & Benefits:
- Biologically and chemically inert
- High porosity yields high flow rates
- Hydrophobic and hydrophilic PTFE varieties available for filtration of aqueous and organic-based samples
Applications:
- Fluoropore Membrane: Clarifying Acids, Bases and Solvents; Air Monitoring; Filtering and Venting Gases; UV Spectroscopy
- Omnipore Membrane: Filtration of Aqueous Solutions, Clarifying Acids and Alkaline Solution
Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions.
Features & Benefits:
- Biologically and chemically inert
- High porosity yields high flow rates
- Hydrophobic and hydrophilic PTFE varieties available for filtration of aqueous and organic-based samples
Applications:
- Fluoropore Membrane: Clarifying Acids, Bases and Solvents; Air Monitoring; Filtering and Venting Gases; UV Spectroscopy
- Omnipore Membrane: Filtration of Aqueous Solutions, Clarifying Acids and Alkaline Solution
We are committed to bringing you Greener Alternative Products, which have been re-engineered to enable more sustainable research solutions. The inner & outer boxes containing the membrane discs are made from bio-circular material allocated using the ISCC mass balance approach. Click here for more information.
Application
- Clarifying acids, bases, and solvents
- Filtering or venting gases
- UV spectroscopy
- Particle monitoring
- HPLC, UPLC, LC-MS/MS mobile phase filtration
- Microplastics analysis
Other Notes
Directions for Use
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
1 of 1
This Item | |||
|---|---|---|---|
| pore size 0.22 μm pore size, 85 % porosity | pore size 0.22 μm pore size, 85 % porosity | pore size 0.22 μm pore size, 85 % porosity | pore size 0.22 μm pore size, 85 % porosity |
| material PTFE membrane, white filter, plain filter | material PTFE membrane, plain filter, white filter | material PTFE membrane, plain filter, white filter | material PTFE membrane, plain filter, white filter |
| parameter 130 °C max. temp., 5 L/min-cm2 air flow rate, 24 mL/min-cm2 water flow rate | parameter 130 °C max. temp., 24 mL/min-cm2 water flow rate, 5 L/min-cm2 air flow rate | parameter 130 °C max. temp., 24 mL/min-cm2 water flow rate, 5 L/min-cm2 air flow rate | parameter 130 °C max. temp., 24 mL/min-cm2 water flow rate, 5 L/min-cm2 air flow rate |
| manufacturer/tradename Fluoropore®, Millipore | manufacturer/tradename Fluoropore®, Millipore | manufacturer/tradename Fluoropore®, Millipore | manufacturer/tradename Fluoropore®, Millipore |
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
| feature hydrophobic | feature hydrophobic | feature hydrophobic | feature hydrophobic |
Still not finding the right product?
Explore all of our products under PTFE Membrane Filter, 0.22 μm Pore Size
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
-
Despite having PTFE high temperature stability, why these filters have max. temp 130 deg. C
1 answer-
Helpful?
-