Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

Ver Toda la documentación

PHR1203

Supelco

Benzaldehyde

Pharmaceutical Secondary Standard; Certified Reference Material

Sinónimos:

Bitter almond

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Fórmula lineal:
C6H5CHO
Número de CAS:
100-52-7
Peso molecular:
106.12
Beilstein:
471223
Número CE:
202-860-4
Número MDL:
MFCD00003299
Código UNSPSC:
41116107
ID de la sustancia en PubChem:
329823210
NACRES:
NA.24
En este momento no podemos mostrarle ni los precios ni la disponibilidad

grado

certified reference material
pharmaceutical secondary standard

Nivel de calidad

300

Agency

traceable to USP 1050905

densidad de vapor

3.7 (vs air)

presión de vapor

4 mmHg ( 45 °C)

familia API

benzaldehyde

temp. de autoignición

374 °F

lim. expl.

1.4 %, 20 °F

condiciones de almacenamiento

protect from light

técnicas

HPLC: suitable
gas chromatography (GC): suitable

índice de refracción

n20/D 1.545 (lit.)

bp

178-179 °C (lit.)

mp

−26 °C (lit.)

densidad

1.044 g/cm3 at 20 °C (lit.)

aplicaciones

cleaning products
cosmetics
flavors and fragrances
food and beverages
personal care
pharmaceutical (small molecule)

Formato

neat

temp. de almacenamiento

2-30°C

cadena SMILES

O=Cc1ccccc1

InChI

1S/C7H6O/c8-6-7-4-2-1-3-5-7/h1-6H

Clave InChI

HUMNYLRZRPPJDN-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

Pharmaceutical secondary standards for application in quality control, provide pharma laboratories and manufacturers with a convenient and cost-effective alternative to the preparation of in-house working standards.
Benzaldehyde is an important flavoring agent after vanillin. It is usually liberated from a cyanogenic glycoside such as amygladin, which is found in fruit kernels.[1][2]

Aplicación

Benzaldehyde may be used as a pharmaceutical reference standard for the quantification of the analyte in pharmaceutical formulations using polarographic method.[1]
These Secondary Standards are qualified as Certified Reference Materials. These are suitable for use in several analytical applications including but not limited to pharma release testing, pharma method development for qualitative and quantitative analyses, food and beverage quality control testing, and other calibration requirements.

Nota de análisis

These secondary standards offer multi-traceability to the USP, EP (PhEur) and BP primary standards, where they are available.

Otras notas

This Certified Reference Material (CRM) is produced and certified in accordance with ISO 17034 and ISO/IEC 17025. All information regarding the use of this CRM can be found on the certificate of analysis.

Nota al pie de página

To see an example of a Certificate of Analysis for this material enter LRAB7805 in the slot below. This is an example certificate only and may not be the lot that you receive.

Productos recomendados

Find a digital Reference Material for this product available on our online platform ChemisTwin® for NMR. You can use this digital equivalent on ChemisTwin® for your sample identity confirmation and compound quantification (with digital external standard). An NMR spectrum of this substance can be viewed and an online comparison against your sample can be performed with a few mouseclicks. Learn more here and start your free trial.

Producto relacionado

Referencia del producto
Descripción
Precios

Palabra de señalización

Danger

Clasificaciones de peligro

Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Aquatic Chronic 2 - Eye Irrit. 2 - Repr. 1B - Skin Irrit. 2 - STOT SE 3

Órganos de actuación

Respiratory system

Código de clase de almacenamiento

6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects

Clase de riesgo para el agua (WGK)

WGK 1

Punto de inflamabilidad (°F)

145.4 °F - closed cup

Punto de inflamabilidad (°C)

63 °C - closed cup

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.

Si necesita más asistencia, póngase en contacto con Atención al cliente

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Conventional and Advanced Food Processing Technologies (2014)
Polarographic determination of benzaldehyde in benzyl alcohol and sodium diclofenac injection formulations
Kazemifard GA, et al.
Journal of Pharmaceutical and Biomedical Analysis, 30(2), 257-262 (2002)
Longyun Lv et al.
ACS combinatorial science, 15(4), 183-192 (2013-02-22)
We previously reported the novel efficient proton/heat-promoted four-component reactions (4CRs) of but-2-ynedioates, two same/different primary amines, and aldehydes for the synthesis of tetra- and pentasubstituted polyfunctional dihydropyrroles. If aromatic and aliphatic amines were used as reagents, four different series of
Hong-gen Peng et al.
Chemical communications (Cambridge, England), 49(26), 2709-2711 (2013-02-26)
A center radially fibrous silica encapsulated TS-1 zeolite (TS-1@KCC-1) has been synthesized in a microemulsion system for the first time. Supporting the Rh(OH)3 species, this novel core-shell structured material serves as a robust bifunctional catalyst for one-pot synthesis of benzamide
Lidia Mateo et al.
PLoS genetics, 10(8), e1004560-e1004560 (2014-08-15)
The increase in availability of whole genome sequences makes it possible to search for evidence of adaptation at an unprecedented scale. Despite recent progress, our understanding of the adaptive process is still very limited due to the difficulties in linking
Ver todos los artículos relacionados

Questions

1–2 of 2 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico