These devices are intended for single use only, and the membrane cannot be removed or changed.
MFHV00025
Milliflip®-HV Non-sterile Vacuum-driven PVDF Filter Unit
Nonsterile, 50 mL process volume, 0.45 µm pore size, PVDF membrane
Sinónimos:
PVDF nonsterile filter unit, tube top vacuum filter
About This Item
Productos recomendados
Materiales
PVDF filter membrane
acrylic housing
polypropylene
Nivel de calidad
esterilidad
non-sterile
Características
holdup volume 0.6 mL
hydrophilic
envase
pack of 25 ea
Parámetros
max. temp. at 45 °C
técnicas
vacuum filtration: suitable
Altura
138 mm
capacidad
50 mL
Diámetro
6.4 cm
diám. del filtro
4 cm
filtración área
7 cm2
embudo capacidad
50 mL
Matriz
Durapore®
tamaño de poro
0.45 μm pore size
Adaptador
double lead thread inlet (with vacuum port)
double lead thread inlet for 50 mL centrifuge tube
Condiciones de envío
ambient
Descripción general
Aplicación
Características y beneficios
Información legal
Producto relacionado
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
-
Can one remove the filter and/or use with an additional filter?
1 answer-
Helpful?
-
-
Can I use the filter itself for further investigation or is it packed and sealed?
1 answer-
These devices are designed to be single use only, and the membrane is not removable/changeable.
Helpful?
-
-
Does the tube holder come with it?
1 answer-
Yes, this product includes one tube stand per box of 25 devices. Please see the link below to review additional information available in the product datasheet:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/204/618/20767821-ms.pdfHelpful?
-
-
What is a Milliflip™ filter unit?
1 answer-
The nonsterile vacuum-driven Milliflip™ filter unit is designed to offer a convenient solution to quickly clarify samples, buffers and reagents prior to analysis.The ready-to-assemble, closed system of the Milliflip™ filtration unit offers an ergonomic design, robust filtration of up to 50 ml, maximizes recovery, saves time, and reduces contamination. There is no sample transfer needed as you can simply filter with a flip of your wrist.
Helpful?
-
-
Why is the liquid flowing out the vacuum tubing line?
1 answer-
There are two recommendations:
1. Confirm orientation: This is likely being used upside-down. See user manual for correct orientation.
2. Make sure to use a trap with filtered line to prevent liquid from entering pump or vacuum set-up (i.e. Millex® FG 50mm Cat. SLFG05010)Helpful?
-
-
What is the maximum centrifugal speed of the conical tube?
1 answer-
5000 x g (Fixed angle 23, 35, 45-degree rotors)
Helpful?
-
-
Does Milliflip™ have other options for membrane material besides 0.45 µm Durapore® polyvinylidene fluoride (PVDF)?
1 answer-
Milliflip™ is currently only offered in 0.45 µm Durapore® polyvinylidene fluoride (PVDF). However, sterile versions of PES, Nylon and PVDF membranes are available in the Steriflip brand.
Helpful?
-
-
What is the minimum volume that can be filtered?
1 answer-
Sample volume should be greater than 1-2 mL. Filter unit hold-up and tubes’ residual hold-up volume can be ~0.5 mL. It is best to have entire filter surface covered in liquid
Helpful?
-
-
Can I sterilize the Milliflip™ Durapore HV filter?
1 answer-
Sterile version of the Durapore-HV filter can be ordered (Steriflip® HV filter Cat. SE1M003M00)
Helpful?
-
-
Do I have to use vacuum pressure to filter my sample?
1 answer-
Yes, this is a vacuum type of device and processing is performed using vacuum pressure. Many types of vacuum sources may be used including pumps and house vacuum
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico