GTTP03700

Membrana de filtración de policarbonato, tamaño de poro 0,22 μm

Isopore^™, filter diam. 37 mm, hydrophilic

• Sinónimos: Isopore^™ Membrane Filter
• Código UNSPSC: 40161507
• eCl@ss: 32031602
• NACRES: NB.24

Propiedades

• Materiales: plain filter; polycarbonate membrane; white filter
• esterilidad: non-sterile
• Características: hydrophilic
• fabricante / nombre comercial: Isopore^™; Millipore
• Parámetros: 0.007 L/min-cm²-psi air flow rate; 140 °C max. temp.; 3.36 mL/min-cm²-psi water flow rate (maximum flow rate per 1.0 psi); ~16 mL/min-cm² water flow rate at 10 psi (typical results)
• diám. del filtro: 37 mm
• grosor: 25 μm
• extraíbles gravimétricos: <1%
• índice de refracción: n/D 1.6
• Matriz: Isopore^™
• tamaño de poro: 0.22 μm pore size; 13.8 % porosity
• punto de burbuja: ≥5.2 bar, air with water at 23 °C
• Condiciones de envío: ambient

Descripción

Descripción general

The Isopore^™ membrane is a polycarbonate, track-etched screen filter useful in surface visualization. It is useful in the analysis of airborne contaminants using optical or electron microscopy. The precise pore diameter and a consistent pore size enable accurate size-base sample separation. Isopore^™ membrane filters are applicable for use in chemotaxis assay, air, monitoring and epifluorescent microscopy.

Aplicación

• Chemotaxis
• Bioassays
• Cytology
• Air monitoring
• SEM analysis
• Sterility testing
• Microplastics analysis
• Microplastics analysis grade water

Características y beneficios

• Isopore^™ membrane structure enables particles retention on the surface for easy counting and analysis.
• Displays low background interference.
• Non-hygroscopic.
• reduced sample analysis time.
• Translucent material.

Precaución

Possible reduction in flow rates may occur after autoclaving.

Información legal

ISOPORE is a trademark of Merck KGaA, Darmstadt, Germany