344289
Freund′s Complete Adjuvant, Modified, Mycobacterium butyricum
This Freund’s Complete Adjuvant, Modified, Mycobacterium butyricum is validated for use in Immunization.
Sinónimos:
Freund’s Complete Adjuvant, Modified, Mycobacterium butyricum
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Productos recomendados
Quality Level
form
liquid
manufacturer/tradename
Calbiochem®
storage condition
OK to freeze
color
clear to slightly cloudy amber
shipped in
ambient
storage temp.
2-8°C
General description
1 Set (10 x 10 ml) each containing yellow, oily, bacterial suspension.
Contains 10 vials per set, each containing 10 ml of Freund′s complete adjuvant homogenized in the following proportions by weight: 85% Drakeol 5NF, 15% Arlacel A (mannide monooleate emulsifier), and 0.1% Mycobacterium butyricum dry cells.
Application
Immunization
Warning
Toxicity: Standard Handling (A)
Physical form
Yellow, oily, bacterial suspension.
Other Notes
Composition
The Freund′s Adjuvant set contains 10 identical ampules, each with 10 ml of Freund′s Complete Adjuvant homogenized in the following preparations by weight:
85% Drakeol 5 NF
15% Arlacel A, mannide monooleate emulsifier
0.1% Mycobacterium butyricum dry cells
Sample Preparation
1. Withdraw contents of ampule using a 10 ml syringe with a 1 inch 21 guage needle. Add to a 50 ml vial, preferably with a narrow neck.
2. Dissolve 50 mg of antigen in 5 ml sterile PBS, pH 7.0-7.3. Maintain or create sterility if at all feasible. Draw the solution into the syringe.
3. Insert needle into adjuvant vial and forcibly drive solution into the vial. Withdraw about half the mixture into syringe and force it into the adjuvant vial again.
4.Repeat the mixing procedure in step 4 until a smooth, stable, milky, water-in-oil emulsion forms. Mixture may seem to thicken as the emulsion forms. Check if the emulsion is complete by expelling a drop from the syringe onto the water surface in a beaker. If the drop remains on the surface and does not disperse when the beaker is agitated slightly, the emulsion is adequate. A properly prepared emulsion is stable for days.
The Freund′s Adjuvant set contains 10 identical ampules, each with 10 ml of Freund′s Complete Adjuvant homogenized in the following preparations by weight:
85% Drakeol 5 NF
15% Arlacel A, mannide monooleate emulsifier
0.1% Mycobacterium butyricum dry cells
Sample Preparation
1. Withdraw contents of ampule using a 10 ml syringe with a 1 inch 21 guage needle. Add to a 50 ml vial, preferably with a narrow neck.
2. Dissolve 50 mg of antigen in 5 ml sterile PBS, pH 7.0-7.3. Maintain or create sterility if at all feasible. Draw the solution into the syringe.
3. Insert needle into adjuvant vial and forcibly drive solution into the vial. Withdraw about half the mixture into syringe and force it into the adjuvant vial again.
4.Repeat the mixing procedure in step 4 until a smooth, stable, milky, water-in-oil emulsion forms. Mixture may seem to thicken as the emulsion forms. Check if the emulsion is complete by expelling a drop from the syringe onto the water surface in a beaker. If the drop remains on the surface and does not disperse when the beaker is agitated slightly, the emulsion is adequate. A properly prepared emulsion is stable for days.
Legal Information
CALBIOCHEM is a registered trademark of Merck KGaA, Darmstadt, Germany
signalword
Danger
hcodes
Hazard Classifications
Asp. Tox. 1
Storage Class
10 - Combustible liquids
wgk_germany
WGK 1
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico