901773

Silver/silver chloride (60/40) paste for screen printing

• Sinónimos: Ag/AgCl paste, C2130809D5, conductive ink
• Fórmula lineal: Ag/AgCl
• Código UNSPSC: 12141740
• NACRES: NA.23

Propiedades

• descripción: Coverage: 200 cm² per g (using a 156 mesh polyester screen); Sheet resistivity:<100 miliohms per square (20 micron thick printed on alumina substrate)
• Formulario: paste
• viscosidad: 2.0-5.5 Pa.s (Haake RS1 C20/2° TiL at 230 sec^-1 at 25°C)

Descripción

Descripción general

This product has a ratio of silver to silver chloride of 60/40.

Aplicación

• Highly sensitive determination of heavy metals in water prior to and after remediation using Citrofortunella Microcarpa: This study utilizes Silver-silver chloride (Ag/AgCl) Paste (60:40) in screen printing electrodes for environmental monitoring applications (Palisoc et al., 2021).
• Screen-printed graphite electrodes as low-cost devices for oxygen gas detection in room-temperature ionic liquids: This research incorporates a silver/silver chloride reference electrode by screen-printing Ag/AgCl paste (60:40) onto a flexible film, exploring its effectiveness in gas sensing technologies (Lee et al., 2017).
• Simple Portable Voltammetric Sensor Using Anodized Screen-Printed Graphene Electrode for the Quantitative Analysis of p-Hydroxybenzoic Acid in Cosmetics: In this study, silver/silver chloride paste (Ag/AgCl: 60/40) was used to enhance the functionality of screen-printed electrodes for cosmetic analysis (Charoenkitamorn et al., 2022).
• Dipstick Sensor Based on Molecularly Imprinted Polymer-Coated Screen-Printed Electrodes for Single-Shot Detection of Glucose in Urine Samples: This research features the use of silver/silver chloride (60:40) reference electrode, screen-printed onto plastic for biomedical applications (Caldara et al., 2023).
• Simultaneous determination of ascorbic acid, dopamine, and uric acid using graphene quantum dots/ionic liquid modified screen-printed carbon electrode: Utilizes carbon ink and silver/silver chloride (Ag/AgCl) paste 60/40 for developing advanced sensor platforms (Kunpatee et al., 2020).

Características y beneficios

Product Benefits

• Applications in medical diagnostics, environmental sensors
• High conductivity
• Low curing temperature

Nota de preparación

PROCESSING

• Screen Printing Equipment: semi-automatic, manual

• Ink Screen Life: >3 hours

• Screen Types: polyester, mesh 156 to 230 tpi

Note: Stainless Steel mesh is not recommended, since a paste component can become corrosive in the presence of moisture.Also, plastic palette knives should be used instead of metal knives.

• Typical Drying Conditions: Dry at 60°C for 30minutes or 80°C for 10minutes in a box oven.

• Clean up solvent: ethoxyl propanol or seriocol

• Substrate: polyester, PVC, polycarbonate and alumina

Información legal

Product of Gwent Electronic Materials Ltd (GEM), part of Sun Chemical Corporation

Información de seguridad

• Pictogramas: GHS05,GHS09
• Palabra de señalización: Warning
• Frases de peligro: H290,H410
• Consejos de prudencia: P234 - P273 - P390 - P391 - P501
• Clasificaciones de peligro: Aquatic Acute 1 - Aquatic Chronic 1 - Met. Corr. 1
• Código de clase de almacenamiento: 8A - Combustible corrosive hazardous materials
• Clase de riesgo para el agua (WGK): WGK 3
• Punto de inflamabilidad (°F): 192.2 °F
• Punto de inflamabilidad (°C): 89 °C