383309
Barium zirconate
powder, <10 μm
About This Item
Productos recomendados
form
powder
Quality Level
reaction suitability
reagent type: catalyst
core: zirconium
particle size
<10 μm
density
5.52 g/mL at 25 °C (lit.)
SMILES string
[Ba++].[O-][Zr]([O-])=O
InChI
1S/Ba.3O.Zr/q+2;;2*-1;
InChI key
DQBAOWPVHRWLJC-UHFFFAOYSA-N
¿Está buscando productos similares? Visita Guía de comparación de productos
General description
Application
- Interface Diffusion and Compatibility of (Ba,La)FeO(3-δ) Perovskite Electrodes in Contact with Barium Zirconate and Ceria.: This study explores the interface diffusion and compatibility of perovskite electrodes in solid oxide fuel cells (SOFCs), demonstrating the stability of barium zirconate as an electrolyte material (Chiara et al., 2023).
- Composite Electrolyte Used for Low Temperature SOFCs to Work at 390°C.: Researchers developed a composite electrolyte incorporating barium zirconate for use in low-temperature SOFCs, highlighting its potential in improving fuel cell performance (Liu et al., 2023).
- In Situ Nanoscale Dynamics Imaging in a Proton-Conducting Solid Oxide for Protonic Ceramic Fuel Cells.: This article presents in situ imaging techniques to analyze the dynamics of proton conduction in barium zirconate, offering insights into its role in protonic ceramic fuel cells (Gorobtsov et al., 2022).
- Proton Conductive BaZr(0.8-x) Ce(x) Y(0.2) O(3-δ): Influence of NiO Sintering Additive on Crystal Structure, Hydration Behavior, and Conduction Properties.: Investigating the impact of NiO additives, this study focuses on the proton conductivity and structural properties of yttrium-doped barium zirconate (Han et al., 2021).
- Inkjet Printed Y-Substituted Barium Zirconate Layers as Electrolyte Membrane for Thin Film Electrochemical Devices.: The paper describes the application of inkjet printing techniques to create thin film electrolyte membranes using yttrium-doped barium zirconate for advanced electrochemical devices (Schneller et al., 2019).
signalword
Warning
hcodes
Hazard Classifications
Acute Tox. 4 Inhalation - Acute Tox. 4 Oral
Storage Class
11 - Combustible Solids
wgk_germany
WGK 1
flash_point_f
Not applicable
flash_point_c
Not applicable
ppe
dust mask type N95 (US), Eyeshields, Gloves
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Artículos
Innovation in dental restorative materials is driven by the need for biocompatible and natural-appearing restoration alternatives. Conventional dental materials like amalgam and composite resins have inherent disadvantages.
A significant limiting factor for wearable electronics and wireless sensors is the finite amount of energy that can be stored in on-board batteries.
Among various ceramics, one-dimensional (1-D) piezoelectric ceramics have attracted significant scientific attention for use in energy harvesting.
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico