Saltar al contenido
Merck

182427

Sigma-Aldrich

Polystyrene

average Mw ~280,000 by GPC

Sinónimos:

PS

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
[CH2CH(C6H5)]n
Número de CAS:
Número MDL:
Código UNSPSC:
12162002
ID de la sustancia en PubChem:
NACRES:
NA.23
En este momento no podemos mostrarle ni los precios ni la disponibilidad

Formulario

beads or pellets

mol peso

average Mw ~280,000 by GPC

índice de refracción

n20/D 1.5916

temperatura de transición

Tg 100 °C

densidad

1.047 g/mL at 25 °C

cadena SMILES

c1(ccccc1)C=C

InChI

1S/C8H8/c1-2-8-6-4-3-5-7-8/h2-7H,1H2

Clave InChI

PPBRXRYQALVLMV-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

Polystyrene is a high molecular weight aromatic synthetic polymer madefrom the polymerization of styrene. It is a hydrophobic durable thermoplasticwidely used in food containers, packaging foam, and construction materials dueto its good mechanical properties and low cost.

Aplicación

Polystyrene can be added to nanocatalyst suspension to prepare a polystyrene-photocatalyst thick film. This film can be used as a photoanode in an airlift photocatalytic fuel cell (APFC).

Polystyrene can be used as a precursor to prepare graphene film and 3D graphene sponges by pyrolysis under argon atmosphere. The filmogenic property of polystyrene can be exploited to prepare 3D graphene sponges with uniform pore sizes.

It can also be used to prepare dyed polystyrene (PS) film for routine dosimetry in radiation processing. Dyed PS film has high post-irradiation stability.

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 2

1 of 2

Alejandra Rendón-Patiño et al.
Nanomaterials (Basel, Switzerland), 9(1) (2019-01-19)
Polystyrene as a thin film on arbitrary substrates or pellets form defective graphene/graphitic films or powders that can be dispersed in water and organic solvents. The materials were characterized by visible absorption, Raman and X-ray photoelectron spectroscopy, electron and atomic
Ba Thanh Ho et al.
Critical reviews in biotechnology, 38(2), 308-320 (2017-08-03)
Polystyrene is a widely used plastic in many aspects of human life and in industries due to its useful characteristics of low cost, light weight, ease of manufacture, versatility, thermal efficiency, durability, and moisture resistance. However, polystyrene is very stable
Di Wei et al.
ACS nano, 2(12), 2526-2530 (2009-02-12)
We have fabricated single-walled carbon nanotube (SWNT) field effect transistors (FETs) with molybdenum source and drain contacts. Normally, these devices operate only as p-channel transistors, however, after polystyrene latex nanospheres were attached to the nanotubes close to the contacts, they
J K R Weber et al.
The Review of scientific instruments, 80(8), 083904-083904 (2009-09-04)
A single-axis acoustic levitator was constructed and used to levitate liquid and solid drops of 1-3 mm in diameter at temperatures in the range -40 to +40 degrees C. The levitator comprised (i) two acoustic transducers mounted on a rigid
Kevin Kendall et al.
Nanotechnology, 20(27), 275701-275701 (2009-06-18)
The weak molecular attractions of nanoparticles are important because they drive self-assembly mechanisms, allow processing in dispersions e.g. of pigments, catalysts or device structures, influence disease through the attraction of viruses to cells and also cause potential toxic effects through

Questions

1–4 of 4 Questions  
  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  3. What is the tacticity of this PS? Is it atactic?

    1 answer
    1. This product is atactic.

      Helpful?

  4. Hello, I'd like to know how these polystyrene samples are typically synthesized? (Free radical polymerization? Anionic living polymerization?) Thanks, Stanley

    1 answer
    1. Unfortunately, the method of polymerization is considered proprietary.

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico