SP15A47FF3

Optiscale 囊式过滤器 Lifegard 1.0 µm 3/4 in.TC/TC

filtration area 17.7 cm², OptiScale^® 47, pore size 1.0 μm

• 别名: Lifegard^™ 1.0 µm 标称, OptiScale^® 囊式
• 分類程式碼代碼: 23151806
• eCl@ss: 32031610

属性

• 材料: PVDF vent cap; borosilicate glass fiber (BGF) ; fluoroelastomer FKM seal; polycarbonate ; polypropylene support
• 品質等級: 400
• 法律遵循: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• 無菌: non-sterile
• 滅菌相容性: autoclavable compatible
• 產品線: OptiScale^® 47
• 特點: hydrophilic
• 製造商／商標名: OptiScale^®
• 參數: 25 °C max. inlet temp.; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 80 psig max. inlet pressure
• 技術: prefiltration: suitable
• 直徑: 6.9 cm (2.7 in.)
• 過濾面積: 17.7 cm²
• 入口接頭直徑: 3/4 in.
• 出口接頭直徑: 3/4 in.
• 雜質: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• 基質: Lifegard^™
• 孔徑: 1.0 μm nominal pore size; 1.0 μm pore size
• 輸入: sample type liquid
• 接頭: inlet sanitary flange; outlet sanitary flange; (19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)

说明

一般說明

Device Configuration: 取样皿滤膜

特點和優勢

Format: Single Layer

其他說明

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

規格

Filter Grade: AP15

準備報告

Sterilization Method
3 autoclave cycles of 60 min @ 121 °C; not in-line steam sterilizable

分析報告

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

法律資訊

Lifegard is a trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany