L25DET6S1

Millistak+^® Lenticular Disc Filters, DE25 media series, 16 in. diameter, 16-cell, silicone seal

• 分類程式碼代碼: 23151806
• eCl@ss: 32031690

属性

• 材料: cellulose ; polypropylene ; silicone seal
• 品質等級: 400
• 描述: sanitization May be hot water sanitized for 20 cycles using purified water @ 80 °C for 30 minutes
• 無菌: (May be steam sterilized for 3 steam-in-place (SIP) cycles of 30 minutes @ 123 °C)
• 特點: hydrophilic
• 電導率測量範圍: 9-12 μmho/cm
• 參數: 0.03 bar max. differential pressure (0.5 psid) (Reverse); 0.2 bar max. inlet pressure (3 psi) at 123 °C; 0.21 bar max. differential pressure (3 psid) at 123 °C (Forward); 1 bar max. inlet pressure (15 psi) at 80 °C; 1.03 bar max. differential pressure (15 psid) at 80 °C (Forward); 2.07 bar max. differential pressure (30 psid) at 25 °C (Forward); 2.1 bar max. inlet pressure (30 psi) at 25 °C
• 高度: 27.6 cm (10.88 in.)
• 直徑: 16 in. , 16-cell; 40.64 cm (16 in.)
• 過濾面積: 3.47 m²
• 雜質: <0.25 EU/mL Aqueous extraction (LAL test)
• 總有機碳（TOC）殘留物: 753-1567 ppb
• 過濾器等級: DE25

说明

一般說明

after a pure water flush of 5 liters per ft² (50 L/m²) of media surface area per autoclaved (1 cycle of 30 minutes at 123 °C) 12" 16-stack device

post autoclave (1 cycle of 30 minutes at 123 °C) and pure water flush of 5 liters per ft² (50 L/m²) of media surface area

分析報告

Post autoclave (1 cycle of 30 minutes at 123 °C) and pure water flush of 50 L/m² of media surface area.
NVR: 3.93–6.43 mg/m²
TOC: 753–1,567 ppb

The effluent of an autoclaved (1 cycle of 30 minutes @ 123 °C) stacked device is negative after a WFI flush of 5 liters per ft² (50 L/m²) of media surface area

法律資訊

MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany

安全信息

• 象形圖: GHS08
• 訊號詞: Danger
• 危險聲明: H372
• 防範說明: P260 - P264 - P270 - P314 - P501
• 危險分類: STOT RE 1 Inhalation
• 標靶器官: Lungs
• 儲存類別代碼: 6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
• 水污染物質分類（WGK）: WGK 3