材料
polypropylene filter
polypropylene housing
polypropylene support
silicone seal
品質等級
法律遵循
meets FDA 21 CFR 177-182 (all component materials)
製造商/商標名
Opticap®
參數
max. inlet temp. at 25 °C
1.0 bar max. inlet pressure (15 psi) at 80 °C
2.75 bar max. inlet pressure (40 psi) at 60 °C
4.8 bar max. differential pressure (70 psid) at 20 °C
5.5 bar max. inlet pressure (80 psi) at 23 °C
80 psig max. inlet pressure
柱標稱長度
5 in. (12.5 cm)
設備尺寸
5 in.
過濾器長度
8.5 in. (21.6 cm)
過濾器直徑
4.2 in. (10.7 cm)
入口接頭直徑
1-1/2 in. , hose barb
入口到出口寬度
21.6 cm (8.5 in.)
雜質
≤0.25 EU/mL USP bacterial endotoxins (LAL test, aqueous extraction)
基質
Clarigard®
孔徑
0.3 μm pore size
接頭
inlet/outlet connection for 38 mm (1 1/2 in.) sanitary flange
正在寻找类似产品? 访问 产品对比指南
一般說明
Cartridge Type: Liquid
Device Configuration: Capsule
包裝
Double Easy-Open bag
準備報告
Sterilization Method:
3 autoclave cycles of 30min at 126°C; not in-line steam sterilizable
3 autoclave cycles of 30min at 126°C; not in-line steam sterilizable
This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21CFR210.3(b)(6).
分析報告
Gravimetric Extractables: ≤ 55mg per capsule after 24 hours in water at controlled room temperature.
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥2L
其他說明
Directions for Use:
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer installation section of OPTICAP® XL Capsules and OPTICAP® XLT Capsules user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
法律資訊
CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门