WHA67023600

Whatman^® in-line HEPA filtration units

Hepa-Cap 36, inlet for 1/4 to 3/8 inch stepped barb, outlet for 1/4 to 3/8 inch stepped barb

• 别名: Z743607
• 分類程式碼代碼: 41104922
• NACRES: NB.24

属性

• 材料: glass fiber-reinforced polypropylene membrane; polypropylene housing
• 無菌: non-sterile
• 包裝: pkg of 1 ea
• 製造商／商標名: Whatman 6702-3600; Whatman Article No. 28420114 (US reference)
• 直徑: 36 mm
• 孔徑: 0.3 μm
• 接頭: inlet for 1/4 to 3/8 inch stepped barb; outlet for 1/4 to 3/8 inch stepped barb

说明

一般說明

Whatman HEPA-CAP Vent Filters are high-retention and high flow-rate glass fiber filters that are commonly used in both research and industry to remove particulates from air and gases.

特點和優勢

• Used across scientific, research, and industrial environments in a variety of air and gas filtration applications that require high particle retention and the ability to capture dirt and debris at high flow rates.
• In-line filter capsules are particularly suitable for sterile venting of fermenters or reaction vessels to prevent airborne particles from entering or exiting the vessel.
• Well suited for tissue culture, in-line filtration, and prefiltration for suction or to serve gas in-line filters.
• Strengthened by dual lamination with a tough polyester monofilament.
• Filters are pleated to maximize surface area for high particle retention and high flow rate
• Typical retention efficiency: 99.97% of all particles ≥ 0.3 µm in air
• Depth filter design: allows for high loading capacity and bi-directional flow
• Repeatedly autoclavable: at 121°C for 20 minutes (132°C max)

其他說明

Field of Use : For internal research use only. Products are not intended for diagnostic use or resale.

法律資訊

Whatman is a registered trademark of Cytiva