PCC030C01

Pellicon^® Capsule with Ultracel^® Membrane

pore size 30 kDa, C Screen, filtration area 0.1 m²

• Synonym(s): Pellicon^® Capsule with Ultracel^® Membrane
• UNSPSC Code: 41104903

Properties

• material: EPDM rubber seal; PPO/PS blend (core); PPO/PS blend housing; TPE seal; composite regenerated cellulose (CRC) membrane; epoxy adhesive; polyester screen; polypropylene screen; polyurethane adhesive
• Quality Level: 400
• sterility: sterile; γ-irradiated
• product line: Pellicon^®
• storage condition: room temperature (15-30°C)
• parameter: 4-8 L/min-m² flow rate (feed); 50 psi max. transmembrane pressure (3.5 bar) at 4-30 °C (forward); 80 psi max. inlet pressure (5.5 bar) at 4-30 °C
• technique(s): ultrafiltration: suitable
• L: 35.3 cm (13.9 in.)
• diam.: 3.8 cm (1.5 in.)
• filtration area: 0.1 m²
• screen size: , Type C screen (coarse screen)
• volume: 26 mL , in feed channel; 62 mL , in permeate channel
• impurities: ≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m²)
• matrix: Ultracel^®
• pore size: 30 kDa
• pH: 2-13
• fitting: 3/4 in. inlet/outlet sanitary flange (feed); 3/4 in. inlet/outlet sanitary flange (permeate); 3/4 in. inlet/outlet sanitary flange (retentate)

Description

General description

The Pellicon^® Capsule is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied sterilized by irradiation.

Application

Concentration, Diafiltration, Buffer exchange, Protein purification

Features and Benefits

Plug ′n play, holderless design - easy to install, safe to remove
Gamma sterilized and preseravtive-free - ready to process in minutes
True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

Packaging

A foam pouch is inserted over the end caps on both ends of the capsule which is then double-bagged and vacuum sealed. The double-bagged capsule is then placed on a tray and individually boxed.

Other Notes

These products are manufactured in a facility which adheres to Good Manufacturing Practices.

The Emprove^® Program complements the product portfolio through

Comprehensive documentation to support qualification, risk assessment and process optimization needs.
Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
Convenient 24/7 access to up-to-date product information.

Legal Information

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany